Navigation - Fiat Connect 7.0 Manual

NAVIGATION

Before Using The
Navigation System
To use the navigation system, the SD
card containing the map information
needs to be inserted in the SD card
slot.
When inserting the SD card, never
move the slider on the side of the SD
card to the LOCK position. If the slider
is set to LOCK, the SD card cannot
be read and the navigation system will
not operate.
This SD card is valid for use in only one
vehicle. Never use it in another vehicle.
If the SD card is used first in one vehicle
and then in another, the navigation
system for either one of the vehicles
may become inoperable.
Navigation Menu
You can reach all parts of the navigation
system from the Navigation menu.
Select and open the navigation menu.
You have the following options:
: Opens and closes the UMP
(menu bar). The UMP (menu bar) is
displayed on the lower part of the
screen.
12000000001001
: Adds a destination. Select your
destination by entering an address or
selecting a POI (point of interest), a
location on the map or one of your
Favorite destinations. You can also look
up your recent destinations from the
Smart History by entering the coordinates.
If an Internet connection is available, Local
Search can be of further help to find your
destination.
: Displays the screen where traffic
information and the GPS reception
conditions can be set and verified.
: Cancels waypoint/route.
: Finds Places nearby You can
search for points of interest (POI) near
the vehicle position.
: Displays the route parameters and
the route in its full length on the map. You
can also perform route-related actions
such as editing or cancelling your route,
picking route alternatives, avoiding parts of
the route, simulating navigation or adding
the destination to your Favorites.
: Changes View mode.
IL001
The map view mode can be changed
(2D north up/2D heading up/3D).
: Switches to the Settings screen
where you change navigation settings.
Note: Some functions are not available
depending on some countries and
regions.
59