Call Interrupt - Fiat Connect 7.0 Manual

Note:
If the ignition is switched off during
a hands-free call, the line is transferred
to the device (Mobile phone)
automatically.
If the DTMF code has two or more
digits or symbols, each one must
be transmitted individually.

Call Interrupt

A call can be interrupted to receive an
incoming call from a third party.
When "Hold + Answer" is selected or
the pickup button on the steering wheel
is pressed, the current call is held and
the system switches to the new
incoming call.
When "End + Answer" is selected, the
current call is ended and the system
switches to the new incoming call (GSM
network only).
When Ignore is selected or the hang-up
button on the steering wheel is
pressed, an incoming call is refused.
Note:
The function may not be available
depending on the contractual content
of the mobile device.
40
The function may not be operable
depending on the type of the
telephone network and the mobile
device.
Receiving And Replying
To Messages (Available
Only With SMS
Compatible Phones)
SMS (Short Message Service)
messages received by connected
devices can be downloaded, displayed,
and played (read by the system).
Additionally, replies can also be made
to calls and messages in the received
messages.
Downloading Messages
Up to 20 new messages can be
downloaded and displayed from a
connected device.
Automatic Downloading
The "Auto Download SMS" (SMS)
setting must be on.
A message is downloaded
automatically when the Bluetooth unit is
connected to the device. Refer to
"Communication settings" Paragraph.
Manually Downloading
When the "Auto Download SMS" (SMS)
setting is off, the message is
downloaded using the following
procedure.
1. Select the icon on the home screen
to display the Communication screen.
2. Select SMS to display the Inbox.
3. Select Update Inbox.
4. Download will be started from the
mobile phone.
Note:
Attached data are not downloaded.
Messages up to 1 kilobyte
(e-mail)/140-bytes (SMS) can be
downloaded.
A message list is created for each
device.
If the connected device does not
correspond to MAP 1.0, the AT
command is used to download. The
downloaded message indicates that it
is already read.
Downloading using the AT
command may not function depending
on the connected device.