Component Parts - Fiat Connect 7.0 Manual

Component Parts

Microphone (Hands-Free)
The microphone is used for speaking
voice commands or when making a
Hands-free call.
Talk button / Pick-Up Button
And Hang-Up Button (Hands-
free)
The basic functions of Bluetooth
Hands-Free can be used for such
things as making calls or hanging up
using the talk pick-up and hang-up
buttons on the steering wheel.
Volume Control Knob —
If Equipped
The Volume Control Knob, near the
Multimedia Control Knob, is used for
volume adjustment and display
operation. Tilt or turn the Multimedia
Control Knob to move the cursor. Press
the Multimedia Control Knob to select
the icon.
Volume Adjustment
The volume dial of the multimedia
control knob is used to adjust
the volume. Turn the dial to the right to
increase volume, to the left to decrease
it. The volume can also be adjusted
using the volume button on the steering
06010904135005
wheel.
Note: If the volume is lower compared
to other audio modes, increase the vol-
ume from the device side.
Conversation volume and the volume of
the voice guidance and ringtone can
each be set in advance.
Proceed as follows:
1. Select the phone icon on the home
screen to display the Communication
screen.
2. Select Setting.
3. Adjust the Phone Volume and the VR
and Ringtone using the slider.
Bluetooth Preparations
Device Pairing
To use Bluetooth audio and Hands-
Free, the device equipped with
Bluetooth has to be paired to the unit
using the following procedure.
A maximum of seven devices including
Bluetooth audio devices and hands-free
mobile phones can be paired.
Note: The Bluetooth system may not
operate for 1 or 2 minutes after the igni-
tion is switched to ACC or ON. How-
ever, this does not indicate a problem. If
the Bluetooth system does not connect
automatically after 1 or 2 minutes have
elapsed, make sure that the Bluetooth
setting on the device is normal and
attempt to reconnect the Bluetooth
device from the vehicle side.
Pairing Procedure
Proceed as follows:
1. Select the icon on the home
screen to display the Settings screen.
2. Select the Devices tab.
3. Select Bluetooth.
4. Turn the Bluetooth setting on.
5. Select "Add New Device" to display
the message and switch to the device
operation.
31