System - Fiat Connect 7.0 Manual

How To Use The
Bluetooth Audio System
Switching To Bluetooth Audio
Mode
To listen to music or voice audio
recorded to a Bluetooth audio device,
switch to the Bluetooth audio mode
to operate the audio device using the
audio system control panel.
Any Bluetooth audio device must be
paired to the vehicle's Bluetooth unit
before it can be used.
Refer to "Bluetooth Preparation"
paragraph.
Proceed as follows:
1. Turn on the Bluetooth audio device's
power.
2. Switch the ignition to ACC or ON.
3. Select the icon on the home
screen to display the Entertainment
screen.
4. When Bluetooth is selected, switches
to the Bluetooth audio mode to begin
playback.
46
Note:
If Bluetooth audio is used after
using Pandora, Aha or Stitcher radio,
the application on the mobile device
has to be closed first.
If the Bluetooth audio device does
not begin playback, select the
If the mode is switched from
Bluetooth audio mode to another
mode (radio mode), audio playback
from the Bluetooth audio device stops.
Playback
To listen to a Bluetooth audio device
over the vehicle's speaker system,
switch the mode to Bluetooth audio
mode (refer to "Switching to Bluetooth
Audio Mode" paragraph). After
switching to the Bluetooth audio mode,
the following icons are displayed in
the lower part of the display.
Icons which can be used differ
depending on the version of the
Bluetooth audio device which you are
currently using.
icon.