Table of Contents
Advertisement
Right Panel
1 2 3 4
5
CAUTION
HEARING LOSS
Turn down the volume to a minimum before connecting a device to the headphone
jack, Line-In jack or microphone jack. Failure to do so could cause damage to the
device connected or result in hearing loss because of very loud sound produced.
1. Volume control
Used to adjust the volume up or down. Turn it counterclockwise to lower the volume, or turn it
clockwise to raise the volume. You can also use the Volume Control dialog box to adjust the
volume and sound balance. If you cannot obtain an enough volume even if you turn up the
volume to a maximum, then use the Volume Control dialog box to make system sounds louder.
Critical Point
If no sound comes out from the speakers even if you adjust the volume, press and hold down
the
key while holding the
[Mute] is not selected in the Volume Control dialog box.
2. Headphone jack
Used to connect commercially available headphones (with a 3.5-mm mini plug). Headphones
with some types of plugs cannot be connected. So before purchasing headphones, make sure
they are compatible with your computer.
6
key down until you hear a beep. Also, check to see that
5
Advertisement
Table of Contents
