Table of Contents
Advertisement
1. Turn off the computer and disconnect the AC adapter from it.
2. Plug the display cable in the external display port on the back of the computer.
The external display port is trapezoid when viewed from the front.
(1) Insert the cable connector in the external display port in correct orientation, then (2)
tighten the screws on both sides of the connector to secure it.
Tighten these screws.
Display cable
(The illustration varies depending on the model and use conditions.)
3. Connect the display cable to the CRT display.
For the way to connect the cable, refer to the manual for your CRT display.
4. Plug the power cable of the CRT display in a wall outlet and turn it on.
5. Connect the AC adapter to the computer, turn it on, and then switch displays.
Critical Point
The following may take place when you turn on your computer for the first time after connect-
ing an external display to it.
- Images are displayed on both the computer's LCD display and the external display.
- The Add New Hardware Wizard appears on the screen of your computer.
If this wizard appears, follow the on-screen instructions to install the display driver.
90
External display port
2
1
2
Advertisement
Table of Contents
