Hibernation - Fujitsu LifeBook C6632 User Manual

Closing the LCD display
1. Make sure that the
LCD display.
The icon is displayed on the CoolView Panel and the power is turned off after a while.
CoolView Panel
(The illustration varies depending on the model and use conditions.)
Resume (Restoring suspended operation)
There are two ways to resume operation.
Using the SUS/RES switch
Use this method if you placed the computer into hibernation mode, using the Shut Down Windows
dialog box or the SUS/RES switch.
1. Simply press the SUS/RES switch.
A window appears on the screen, showing the progress of the reloading of the saved data from
the hard disk. After a while, the system will resume at the same point as when you suspended
operation.
CoolView Panel
(The illustration varies depending on the model and use conditions.)
Critical Point
If pressing the SUS/RES switch does not cause the computer to resume operation, it is
probable that the MAIN switch is turned off. If so, turn it on. This displays a window showing
the progress of the reloading of the saved data from the hard disk, and after a while, the
system will resume at the same point as when you suspended operation.
or icon is not displayed on the CoolView Panel, then close the
LCD display
SUS/RES switch
45