Advertisement

Model No. WLEL33408.0
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if parts are damaged or missing,
PLEASE DO NOT CONTACT THE
STORE; please contact Customer
Care.
IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:
1-866-699-3756
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manu-
al for future reference.
USERʼS MANUAL
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WLEL33408.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for Weslo WLEL33408.0

  • Page 1 USERʼS MANUAL Model No. WLEL33408.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are commit- ted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE DO NOT CONTACT THE STORE;...
  • Page 2 TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS .
  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical exerciser before using your elliptical exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
  • Page 4: Before You Begin

    BEFORE YOU BEGIN Congratulations for selecting the new WESLO PRO™ product model number and serial number before con- 13.8E elliptical exerciser. The 13.8E is an incredibly tacting us. The model number and the location of the smooth exerciser that moves your feet in a natural...
  • Page 5: Assembly

    ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable wrench...
  • Page 6 To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser. Identify the Front Stabilizer (3). Make sure that the Front Stabilizer is turned so that the Wheels (32) are not touching the floor. While another person lifts the front of the Frame (1), attach the Front Stabilizer (3) to the Frame with two M10 x 112mm Carriage Bolts (34) and...
  • Page 7: Harness (86) To The Lower Wire Harness (87

    3. While another person holds the Upright (2) in the position shown, connect the Upper Wire Harness (86) to the Lower Wire Harness (87). Do not pinch the Wire Tip: Avoid pinching the Wire Harnesses (86, Harnesses (86, 87) 87). Insert the Upright (2) into the Frame (1). during this step Next, slide an M10 Split Washer (70) and a Frame Spacer (83) onto each of the two M10 x...
  • Page 8 5. The Console (5) can use four 1.5V “D” batteries (not included); alkaline batteries are recom- mended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- Battery ing batteries. Otherwise, you may damage Cover the console displays or other electronic components.
  • Page 9 7. Identify the Left Handlebar (9), which is marked with a “Left” sticker. Insert the Left Handlebar (9) into an Upper Body Leg (79). Make sure that the hexagonal holes are in the indicated location. Attach the Left Handlebar (9) to the Upper Body Leg (79) with two M8 x 45mm Button Bolts (50) and two M8 Locknuts (46).
  • Page 10 9. Tighten an M8 x 25mm Patch Screw (22) and an M8 Large Washer (53) into each end of the Pivot Axle (97). Attach the Handlebar Caps (23) by pressing the small tabs into the Handlebar Spacers (25). 10. Apply grease to the barrel of an M10 x 52mm Bolt Set (27) and to the surfaces of the two Leg Bushings (28) in the left Upper Body Leg (79).
  • Page 11: How To Use The Elliptical Exerciser

    HOW TO USE THE ELLIPTICAL EXERCISER HOW TO EXERCISE ON THE ELLIPTICAL HOW TO USE THE HANDLEBARS EXERCISER The handlebars are Handlebars To mount the elliptical exerciser, hold the handgrip designed to add pulse sensor and step onto the pedal that is in the upper-body exer- lower position.
  • Page 12 CONSOLE DIAGRAM FEATURES OF THE CONSOLE In addition, the console features two heart rate work- outs that automatically change the resistance of the The advanced console offers a selection of features pedals and prompt you to vary your pace to keep your designed to make your workouts more enjoyable and heart rate near a target heart rate while you exercise.
  • Page 13 HOW TO USE THE MANUAL MODE The upper display— This display will show 1. Press any button on the console or begin the approximate num- pedaling to turn on the console. ber of calories you have burned, the dis- A few seconds after the console is turned on, the tance you have ped- displays will light.
  • Page 14 5. Measure your heart rate if desired. 6. Turn on the fan if desired. If there are sheets of The fan has high, low, and auto speed settings; clear plastic on the while the auto mode is selected, the speed of the metal contacts on fan will automatically increase or decrease as you the handgrip pulse...
  • Page 15 HOW TO USE A SMART WORKOUT As you exercise, the target pace guide will 1. Press any button on the console or begin help you to keep your pedaling to turn on the console. pedaling pace near the pace setting for the A few seconds after the console is turned on, the current segment.
  • Page 16 HOW TO USE A HEART RATE WORKOUT If you select heart rate workout 2, the maximum target heart rate setting of the workout will flash in 1. Press any button on the console or begin the lower display. If desired, press the increase pedaling to turn on the console.
  • Page 17 Both heart rate workouts—As you pedal, the Note: During the workout, you can manually over- console will regularly compare your heart rate to ride the resistance setting for the current segment, the target heart rate setting for the current seg- if desired, with the Resistance buttons.
  • Page 18: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING HANDGRIP PULSE SENSOR TROUBLESHOOTING Inspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately. • Avoid moving your hands while using the handgrip To clean the elliptical exerciser, use a damp cloth and pulse sensor.
  • Page 19: Part List

    EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning time. During the first few minutes of exercise, your this or any exercise program, consult your body uses carbohydrate calories for energy.
  • Page 20 PART LIST—Model No. WLEL33408.0 R0708A Key No. Qty. Description Key No. Qty. Description Frame M8 Locknut Upright Crank Screw Front Stabilizer Hub Cover Rear Stabilizer M6 x 25mm Bolt Console M8 x 45mm Button Bolt Left Shield M6 x 18mm Button Bolt...
  • Page 21 Key No. Qty. Description Key No. Qty. Description M4 x 22mm Screw M8 Washer Inner Pedal Arm Sleeve Water Bottle Holder M6 Washer Pulse Sensor Large Snap Ring Left Pulse Bar Wave Washer Right Pulse Bar M3 x 16mm Screw Pulse Bar Foam Pivot Axle Pulse Bar Cap...
  • Page 22: Exploded Drawing

    EXPLODED DRAWING A—Model No. WLEL33408.0 R0708A...
  • Page 23 EXPLODED DRAWING B—Model No. WLEL33408.0 R0708A...
  • Page 24: Limited Warranty

    ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

13.8e

Table of Contents