Page 2
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of GIGA-TMS INC. Apr , 10...
Page 3
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communication.
Page 4
LR03 / AAA LR03 / AAA 1. Insert batteries into your device properly, with the (+) and (-) terminals aligned correctly. 2. Discharged batteries should be removed from equipment to prevent possible damage. 3. Store the batteries in a cool and dry place. [Batteries should be stored at temperatures between 50°F (10°C) and 77°F (25°C), with relative humidity not exceeding 65 percent.
Page 5
Information LR03 / AAA LR03 / AAA 1. Insert batteries into your device properly, with the (+) and (-) terminals aligned correctly. 2. Discharged batteries should be removed from equipment to prevent possible damage. 3. Store the batteries in a cool and dry place. [Batteries should be stored at temperatures between 50°F (10°C) and 77°F (25°C), with relative humidity not exceeding 65 percent.
Page 7
Indicating the device is ready for use low battery in operational mode. For connection to host computer and external Power . Put the battery in box and hold battery . Turn the PCR200/MFR200 on/off power and Operate. Connect to chain sling.
Page 8
Technical And Operational Description Battery Power Supply EM Card Decoded Low Battery Power Supply Mifare 1K Card Decoded External Power Supply Mifare 4K Card Decoded Mifare DESFire Card Decoded Mifare Ultralight Card Decoded Scaning Felica Card Decoded Current Record Number When Scanning or Buzzer ON Viewing Database Main Menu Item When Operating Menu...
Page 9
Technical And Operational Description Display Machine ID - 2 Characters Default : 00 Display User Name - 16 Characters Max Select Mode - ID Number Set View Mode - Big or Small Default : Big Set Scan Mode - Button or Continuous Default : Button Set Back Light Duration - 03~ 255 Seconds...
Page 10
Technical and Operational Description The RTC is malfunctioning Set Date and Time ( After scan card ) The record already is full. Download Records ( After scan card ) and Erase Records The record can’t write into the FLASH memory. Contact Agent ( After scan card ) Scan Card can’t decode.
Page 11
“ and you must change battery immediately ; otherwise, the unit would shut down any time without pre-warning. When PCR200/MFR200 is showing the status of any function on the screen, after presenting a RFID card to PCR200/MFR200 reader, PCR200/MFR200 is displaying card ID and record(s) information on the screen immediately. When PCR200/MFR200 is not working for next card scan , PCR200/MFR200 reader will back to default screen automatically.
Page 12
Technical and Operational Description 1. Read the instructions on your device before replace new battery. 2. PCR200/MFR200 can used Single-cell alkaline, nickel-cadmium (NiCd), or nickel-metal hydride (NiMH) Battery...
Page 13
1. When PCR200/MFR200 is connected/disconnected with an external power adapter, it would be turned On/Off automatically. 2. When PCR200/MFR200 is not connected with an external power adaptor , the corresponding key for power on PCR200/MFR200 needs to be pressed all the time during the communications with the PC.
Page 14
Connections 1. When PCR200/MFR200 is connected/disconnected with USB port, it would be turned On/Off automatically.
Page 16
EM compatible64 bits, ASK Manchester coding. Reading distance Up to 45mm (depends on card). Compatible ISO 14443A, ISO 18092. Reading distance Up to 35mm (depends on card). RS232 , Half-Duplex , 8N1 , 19200 bps Full compliance with the USB Specification V 1.1 The device uses a Virtual Serial Port Driver, making it appear to have the software like a standard RS232 Serial Port.
Page 17
NACK NACK TIME OUT Start of Text ASCII ASCII ASCII Command Code ASCII ASCII ASCII Contents Data ASCII ASCII ASCII Check Sum Carriage Return (78) 65 (4e) 41 (N) A (Negative) Acknowledge...
Page 18
There are 2 levels of access to the PCR200/MFR200 : User and Supervisor. Supervisor level is protected by a Password. Sensitive data can be downloaded or altered only on the Supervisor level. General Terminal data is available on the User level as well.
Page 25
Communication Protocol Auto Off Duration(Low byte) 00~FFh (0~ 255 second ) 00h: Auto Power Off Power Mode FFh: Switch 13~14h RTC cal. value 00 ~ FFh 16~17h Back Light Duration 00~FFh (0~ 255 second ) 00h: Off Buzzer FFh: On 00h: mm/dd/yyyy Date Format FFh: yyyy/mm/dd...
Page 26
Communication Protocol 00h : White List Total: 0 , Record Total : 65536 01h : White List Total: 256 , Record Total : 65024 02h : White List Total: 512 , Record Total : 64512 03h : White List Total: 768 , Record Total : 40h : White List Total: 16384 , Record Total : 32768 80h: White List Total: 32768 , Record Total : Memory Segment Value...
Page 27
Communication Protocol Record Total = 65536 White List Total =32768 White List Total =16384 Record Total = 32768...
Need help?
Do you have a question about the PCR200 and is the answer not in the manual?
Questions and answers