Tone Dialing Switch Over - Uniden TRU9380 User Manual

Cordless phone system with digital answering system and call waiting/caller id

Hide thumbs Also See for TRU9380:

Table of Contents

Answering an Intercom Page

When the intercom page tone sounds, the display will show the ID of the station that is paging.

Press [

or [hold/int'com/xfer]. If AutoTalk is on, the handset will automatically answer the page when

you remove the handset from the cradle.

To hang up an intercom page from the handset, press [ ].

Tone Dialing Switch Over

If your phone is set to pulse dialing, you can switch to tone dialing after the call connects. This feature is useful when

customer support menus, etc. Make your call normally. Once your call connects, press [

digits you enter from then on will be sent with tone dialing. When this particular call ends, the phone automatically

returns to pulse dialing.

See Changing the Dial Mode on page 15 for instructions on setting your phone for pulse or tone dialing.

Installing the Optional Headset

Your phone may be used with an optional headset. To use this feature, insert

the headset plug into the headset jack. Your phone is ready for hands-free

conversations. (Headsets may be purchased by calling the Uniden Parts

Department. See back cover page for contact information.)

/tone] on the handset. Any

Table of Contents