Connecting The Base And Charging The Handset - Uniden TRU9380 User Manual

Connecting the Base and Charging the Handset

1. Connect the AC adapter to the DC IN 9V jack.
AD-800 AC adapter.
2. Connect the AC adapter to a standard 120V AC wall outlet. DO NOT
use an AC outlet controlled by a wall switch.
3. Place the handset in the base with the LCD screen facing forward.
4. Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the charging contacts.
5. Charge your handset at least 15 to 20 hours before plugging into the
phone line.
Connecting to the Phone Line
Once the battery pack is fully charged, connect the telephone cord to the
TEL LINE jack and to a telephone jack.
Testing the Connection
Try making a call. If your call does not connect or you cannot get a dial
tone, try the following steps:
1. Make sure the AC adapter cord is securely connected to the DC IN
9V jack and a standard power outlet.
2. Check to make sure the battery is fully charged. (If you don't see
the "battery full" icon, check to make sure the battery is properly
connected).
3. Change the dial mode (instructions below).
14