Troubleshooting - Uniden TRU9380 User Manual

Cordless phone system with digital answering system and call waiting/caller id

Hide thumbs Also See for TRU9380:

Table of Contents

Troubleshooting

Resetting the Handset

You may need to reset your handset in the following instances:

•

When you want to change the digital security code.

•

You lose a handset and purchase a new one.

•

You get the message Registration Failed when you try to register the handset.

•

You are unable to register any handsets to the base.

•

When you register new handsets to the base, the handset IDs do not match. (For example, the handset registers

as "Handset #4" but you only have two handsets.)

•

When you are instructed to by one of Uniden's call center representatives.

Press and hold [ ] and [#] for more than 5 seconds. Select DEREGISTER HS.

Select the handset you want to reset, then press [select/

information from the base, and then delete the link to the base from its own memory.

When the base information is deleted, the handset displays MODELS VARY! CHARGE HANDSET ON THE

BASE FOR REGISTRATION OR REFER TO OWNER'S MANUAL.

Re-register the handset to the base (see Registering Accessory Handsets on page 18).

If the handset cannot contact the base, it will display UNAVAILABLE. Make sure the handset is in range of the base

and the base is connected to power.

Table of Contents