AT&T Synapse SB67040 User Manual page 34

Description Setup
To adjust the display contrast:
Figure. 23 Contrast Menu
To adjust the sound:
Figure. 24 Sounds Menu
SB67040 Remote Handset User's Guide - Setup
Answer
Make Call Call
1. Press the left or right NAVIGATION button to adjust the Contrast until the desired
level is reached.
2. Press EXIT to accept the adjustments and return to the Settings menu shown in
Figure 22 on page 30.
1. Press the up or down navigation key to cycle through audio options.
2. To adjust the Ring Volume from 0 to 6, Press the left or right NAVIGATION button.
Decreasing the volume to zero will turn off the ringer. The ringer will sound as it is
adjusted. You may also alter the ringer volume in Idle by pressing the Volume
Predefined key.
3. Press the down arrow on the NAVIGATION button once to choose one of eight
Ringers. The ringer tone for an incoming call from another extension will be
different.
4. Press the down arrow on the NAVIGATION button twice to highlight Key Beeps.
Press the left or right NAVIGATION button to adjust the Key Beeps ON or OFF.
5. Press EXIT to accept the adjustments and return to the Settings menu shown in
Figure 22 on page 30.
Voice
Mail Hold/Park
31
Call
Transfer Conference Trouble Glossary