Advertisement
How To Install Wall Mount Support
1. Caution
1. Install on the vertical wall surface only.
2. Do not install on the following places to protect the performance of LCD TV and to prevent malfunction.
- Near sprinkler detector - Near heating devices - Places where vibration or shock may be applied
- Near high-voltage power line
3. Wall mounts must not be mounted to surfaces or building materials that cannot support the wall mount.
If the wall is not strong enough to stand the weight of TV set, reinforce the wall surface before installation.
4. Do not install within a wall.
2. Accessories
Fixing Panel Assembly
3. Angle Adjustment (Optional)
The wall mount bracket allows you to adjust the angle of TV from 0 degree to 20 degree on a 5 degree basis.
When adjusting the angle, use the holes on the side of the bracket.
5
0
angle
15
Base Frame Assembly
The above image may look different from the real product.
20
0
angle
No angle
Plastic Anchor - 12 EA
Long Screw - 12 EA
Washer - 12 EA
Short Screw - 8 EA
Fixing Pin - 2 EA
0
0
: A + a
15
0
: A + c
5
0
: B + c
20
0
: A + d
10
0
: A + b
A
B
Holes for angle adjustment
a
b
c
d
Advertisement
