Table of Contents
Advertisement
USA
Hyundai ImageQuest America
3101 North First Street San Jose, CA 95134
Hyundai tech support
Tel : +800-568-0061,408-232-8654
Fax : +408- 232-8146
e-mail : syuen@hyundaiqa.com
AVC USA. INC.
777 Mark Street, Wood Dale, IL 60191
Tel : 630-595-0123 / 800-568-0060
Fax : 630-595-2345 / 800-784-9422
e-mail : avctech@avcusa.com
NEW ZEALAND
TRANSTECH DISTRIBUTORS Ltd.
PO Box 12985 Penrose,
Auckland New Zealand
Tel : 09-571-0775
Fax : 09-571-0776
e-mail : LouisG@Transtech.co.nz
WWW : www.transtech.co.nz
AUSTRALIA
Thomas Electronics Australia Pty Ltd.
3 Sheridan Close
Milperra NSW 2214, Australia
Tel : +61 2 9773 7400
Fax : 61 2 9773 7177
Attn : Ms. Shiely Poniman
GERMANY
Hyundai ImageQuest Europe GmbH
Geheimrat Hummel Platz 2
65239, Hochheim, Germany
Tel : 06146 / 904 444
Fax : 06146 / 904 410
e-mail : service@hyundaiq.de
WWW : www.hyundaiq.com
JAPAN
Hyundai ImageQuest JAPAN
Shin-Hibiya Bldg, East 5F 1-3-6
Uchisaiwai-Cho, Chiyoda-ku,
Tokyo, Japan 100-0011
Tel : 03-5157-2286
Fax : 03-5157-2284
e-mail : pjkim@iqt.co.kr
C/S P.J.Kim
P/N 632 0238 103 Rev.02
* The above image may look different from the real product.
Advertisement
Chapters
Table of Contents
Related Manuals for Hyundai 320WR
Summary of Contents for Hyundai 320WR
- Page 1 Hyundai ImageQuest America 3101 North First Street San Jose, CA 95134 Hyundai tech support Tel : +800-568-0061,408-232-8654 Fax : +408- 232-8146 e-mail : syuen@hyundaiqa.com AVC USA. INC. 777 Mark Street, Wood Dale, IL 60191 Tel : 630-595-0123 / 800-568-0060 Fax : 630-595-2345 / 800-784-9422 e-mail : avctech@avcusa.com NEW ZEALAND TRANSTECH DISTRIBUTORS Ltd.
-
Page 2: Fcc Information
FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning : NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 3: Declaration Of Conformity
Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC. Accredited testlaboratory: Am Grauen Stein KOREA /MAY. 15, 2004 Place and date of issue) HYUNDAI LCD TV HQL260WR/320WR : LT26AW000 / LT32AW000 TÜV Rheinland 51105 Köln HONG KI, KIM (Name and signature of... -
Page 4: Important Tips
Important Tips Image Retention Effect(Image Sticking) 1. Cause : - If LCD TV displays the same pattern for a long period of time, Image Retention Effect may develop due to the LCD structure. - This is a common phenomenon that occurs in all LCD products on current market. 2. - Page 5 - This Matter(Image Sticking) is same thing under the other LCD's Company. - Still Image/Letter in watching TV also will be effect to Image sticking. *This matter(Image Sticking) is out of warranty. HYUNDAI LCD TV HQL260WR/320WR Panorama, Wide, 4:3 aspect ratio Box or Still image...
-
Page 6: Favorite Channel Memory
Features A Wide Array of Screen Settings You can choose different screen settings depending on the type of program you are watching or the surrounding conditions (the lighting or the outside weather conditions). You can switch among Standard, Sport, Natural and Mild, or you can configure the screen settings for yourself. -
Page 7: Table Of Contents
Supported PIP Table ...38 How to Set the Geometry (In PC mode) ... 39 How to Set the Geometry (In DTV mode) ... 40 HYUNDAI LCD TV HQL260WR/320WR Sound Setup How to Select the Audio Mode ... 43 How to Select the Desired Mode ... 44 How to Select the Balance, Volume and Sound Source ... -
Page 8: Safety Precaution
Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. WARNING WARNING If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth. - Page 9 - This may cause the LCD TV to fall, resulting in serious injury to a child or adult. HYUNDAI LCD TV HQL260WR/320WR Please avoid touching the panel at the rear of LCD TV as it is producing high temperature.
- Page 10 Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. WARNING WARNING ...Continued from previous page Never attempt to open, fix, or modify the LCD TV. - When there is a need for fixing, call a service center.
- Page 11 - It may cause a fire or an electric shock. Do not install the product on the floor. - If it falls over, your child may be injured. HYUNDAI LCD TV HQL260WR/320WR Ensure the power cord doesn’t trail across any hot objects like a heater.
- Page 12 Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. WARNING ALERT ...Continued from previous page Do not place toys and cookies, etc. on the LCD TV, which may attract children’s attention.
- Page 13 When moving the LCD TV, 2 or more people are advised to carry it. - Injury or damage may be caused when the LCD TV falls. HYUNDAI LCD TV HQL260WR/320WR Always use the standard batteries and avoid using old batteries together with new ones.
-
Page 14: Contents Of The Package
Contents of the Package To purchase additional parts, consult a distributor or selling agent. Japan Antenna Cable Power Cord America/Canada Europe Australia South Africa Remote Control/2 Batteries User’s Guide (1.5V AAA) Korea Products Sold Separately If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller. Scart cable S-video cable Wall mounting frame... -
Page 15: How To Use The Kensington Security Slot
* Kensington Technology Group • Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289 • Tel : +1 650 572 2700 • Web-site : www.kensington.com HYUNDAI LCD TV HQL260WR/320WR • Fax : +1 650 572 9675... -
Page 16: How To Use The Rear Cap And Cable Holder
How to Use the Rear Cap and Cable Holder The Rear Cap and Cable Holder allow you to organize the connection cables on the rear of the product. 1. Pressing and pulling the three hooks on the rear can detach the Rear Cap. 2. -
Page 17: How To Adjust The View Angle
HYUNDAI LCD TV HQL260WR/320WR How to Adjust the View Angle You can adjust the angle of the view for the desired view angle. You can adjust any angle within a range of 30º to the left or right. You can adjust the tilt of the TV from -5º to 10º after the installation. -
Page 18: How To Install Wall Mount Support
How To Install Wall Mount Support 1. Caution 1. Install on the vertical wall surface only. 2. Do not install on the following places to protect the performance of LCD TV and to prevent malfunction. ·Near sprinkler Detector, ·Places where vibration or shock may be applied , ·Near high voltage electric power line 3. -
Page 19: How To Install Wall Mount Frame
1. Unscrew screws fasted on 5 spots on the stand of LCD TV. 2. Fasten the Fixing Panel assembly on the back of LCD TV as shown on the picture. (Numbering step) HYUNDAI LCD TV HQL260WR/320WR 3. Fix the Base Frame Assy on the wall with screws or nails. Stopper Pin 4. -
Page 20: Parts Names And Functions
Parts Names and Functions Front View * The above image may look different from the real product. Source button Use this button to switch among inputs connected to the LCD TV. Menu button Use this button to display or exit from menus. Volume buttons Use these buttons for your desired sound level. -
Page 21: Rear View
This allows you to connect your antenna. F SCART input terminal For Composite Video/Audio or R,G,B inputs used in the European area. HYUNDAI LCD TV HQL260WR/320WR Headphone Jack Connect to the Headphone. Video Composite input terminal for VCR Connect to the Composite Video output terminal of VCR or DVD player. -
Page 22: Remote Control
Remote Control ❶ POWER/STANDBY Use this button to turn the TV set on or off. ❷ MUTE Use this button to turn the sound off completely. ❸ NUMERIC KEYS - Use these buttons to select channels and input digit. ❹ Pr/C/S(Program/Brodcast Channel/Cable Channel) Use this button to select TV input source. - Page 23 How to Insert Batteries in Remote Control Press and hold ∆ part and push to open cover. *Battery type : 1.5V/BP-2KM(AAA/LR03G) HYUNDAI LCD TV HQL260WR/320WR Teletext & Fastext Function ① TTX ON/OFF Use this button to activate the teletext mode.
-
Page 25: Connections
Connections Connecting Indoor/Outdoor TV Antenna (UHF/VHF) ... 23 Connecting to the antenna input connection on the external equipment ... 24 Before connecting the video/audio connections to external devices ... 25 Connecting VCR, Cable/Satellite Receiver ... 26 Connecting a DTV Receiver or DVD player ... 27 Playing back a tape recorded on a camcorder ... -
Page 26: Connecting Indoor/Outdoor Tv Antenna(Uhf/Vhf)
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) Connection Method Ensure to connect an antenna cable to the antenna input connection. Power Cable How to Watch Turn on your LCD TV and press You can select SCART1 Press or numeric keys to select the desired channels. •... -
Page 27: Connecting To The Antenna Input Connection On The External Equipment
Connecting to the Antenna Input Connection on the External Equipment Connection Method Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input. Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on your LCD TV. VCR/Cable Receiver HYUNDAI LCD TV HQL260WR/320WR Coaxial cable... -
Page 28: Before Connecting The Video Connections To External Devices
Before connecting the video connections to external devices ... Please make sure to read the following information on connection to enjoy best picture quality. Video connectors Types of video cable : ➀ 15-Pin D-SUB ➁ COMPONENT ➂ S-VIDEO ➃ COMPOSITE ➄ FULL SCART ➅ HALF SCART Best picture quality is displayed in the following order. -
Page 29: Connecting Vcr, Cable/Satellite Receiver
Cable/Satellite receiver play : Turn on the receiver and select a channel. Read a user manual of VCR, Cable/Satellite Receiver for more details. Use S-video cables for better picture quality. HYUNDAI LCD TV HQL260WR/320WR VCR/Cable Receiver Audio Cable VIDEO Cable or S-VIDEO Cable on remote control unit to select Video or S-Video. -
Page 30: Connecting A Dtv Receiver Or Dvd Player
Connecting a DTV Receiver or DVD Player Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV receiver or DVD player and the input terminals(Y, Pb, Pr) of DTV/DVD(480i/480p/720p/1080i) on the rear of LCD TV. (Connect cables and terminal in the same colors) Connect Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminal for DTV/DVD Audio on the rear of LCD TV. -
Page 31: Playing Back A Tape Recorded On A Camcorder
AV2 VIDEO AV1 S-VHS Turn on a Game player or Camcorder and use it. Read the user manual of Game player or Camcorder for more details. HYUNDAI LCD TV HQL260WR/320WR Camcorder Audio Cable VIDEO Cable on remote control unit to select Video. -
Page 32: Connecting To A Pc
Connecting to a PC Connection Method Connect PC signal cable(15 pins D-SUB) between output terminal of PC and the D-SUB input terminal of a LCD TV. Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of LCD TV. (Connect cables and terminal in the same colors) D-SUB Cable (15pin) -
Page 33: Resolutions Supported In Pc
Resolution 640 x 350 640 x 480 720 x 400 800 x 600 1024 x 768 * Recommended Resolution is 1024x768@60Hz * Max Resolution is 1024x768@75Hz HYUNDAI LCD TV HQL260WR/320WR Horizontal frequency Vertical frequency 31.47 31.47 37.86 37.50 31.47 37.88 48.08... -
Page 34: Scart Connection To The External Input/Output
Scart Connection to the External Input/Output Connection Method This end can be fitted with : A Scart connector If you have a second VCR and wish to copy a cassettes tape, connect the source VCR to “F Scart” and the target VCR to “H Scart”... -
Page 35: Scart Pin Specifications
Audio Intput GND Audio Intput L Switching Voltage Input If RGB signals come into “SCART 1”, Input Mode will change from “SCART 1” to “RGB”. HYUNDAI LCD TV HQL260WR/320WR SIGNAL Red Intput GND RGB Red Input RGB Blinking Signal Input... -
Page 37: Picture Setup
Picture Setup How to Select the Picture Mode ... 35 How to Set the Desired Picture ... 36 How to Set PIP [Mode] ... 37 Supported PIP Table ... 38 How to Set the Geometry(In PC mode) ... 39 How to Set the Geometry(In DTV mode) ... 40... -
Page 38: How To Select The Picture Mode
How to Select the Picture Mode Users can adjust picture mode automatically according to the input mode(TV, Video1·2, S-Video, F/H Scart, DVD/DTV). Press Menu button. MENU Menu items appear on the screen. Press Left, Right or OK button to select “Picture”. -
Page 39: How To Set The Desired Picture
If you adjust the Picture in step 3 while it is in Standard, Sports, Natural or Mild mode, the mode will change to Custom mode. *Adjustments menu may be different according to the input source. HYUNDAI LCD TV HQL260WR/320WR Picture Sound... -
Page 40: How To Set Pip [Mode]
How to Set PIP [Mode] - You can watch another device's image in the PIP while watching the TV, S-Video, DTV, Scart1/2 or VIDEO in the main image. - This function is available only with the remote control. Press the PIP button. You will see the PIP at the upper right corner. -
Page 41: Supported Pip Table
The Main image and PIP image will switch with each other whenever you press this button. Main Supported PIP Table Main S-Video AV1 Video AV2 Video Scart1(F) Scart2(H) HYUNDAI LCD TV HQL260WR/320WR Main PIP : O → Supported, X → Not Supported S-Video AV1 Video AV2 Video Scart1(F) Scart2(H) -
Page 42: How To Set The Geometry (In Pc Mode)
How to Set the Geometry (In PC mode) This function allows you to tune your screen in PC Input Mode. Press Menu button. MENU Menu items appear on the screen. Press Up and Down buttons to move to “Geometry”. Press Left, Right or OK button to move to select “Geometry”. -
Page 43: How To Set The Geometry (In Dtv Mode)
H. SIZE : To adjust the horizontal size of the picture. H. POSITION : To adjust the horizontal position of the picture. V. POSITION : To adjust the vertical position of the picture. RELOAD : To set the Geometry to the default. HYUNDAI LCD TV HQL260WR/320WR Geometry Picture Sound... -
Page 45: Sound Setup
Sound Setup How to Select the Audio Mode ... 43 How to Set the Desired Audio ... 44 How to Set the Balance, Volume and Source ... 45 How to Select SRS WOW(Surround) ... 46 How to Listen to Stereo Sound/Dual Sound ... 47... -
Page 46: How To Select The Audio Mode
How to Select the Audio Mode - Users can adjust sound mode automatically as users want. - In SRS On mode, Equalizer in Sound Menu is not activated. Press Menu button. MENU Menu items appear on the screen. Press Up and Down buttons to move to “Sound”... -
Page 47: How To Select The Desired Mode
If the INPUT button is pressed, the menu disappears. If you adjust the frequency (100Hz, 300Hz, 1KHz, 3KHz, 10KHz) in Standard, Music, Film or Speech mode, the mode will change to Custom mode. HYUNDAI LCD TV HQL260WR/320WR HYUNDAI LCD T V HQL260 Picture... -
Page 48: How To Select The Balance, Volume And Sound Source
How to Set the Balance, Volume and Sound Source Press Menu button. MENU Menu items appear on the screen. Press Up and Down buttons to move to “Sound”. Press Left, Right or OK button to select “Sound”. Press Up and Down buttons to move to “Balance”... -
Page 49: How To Select Srs Wow(Surround)
The enriching effects of WOW are especially noticeable on digitally compressed mono or stereo audio in formats such as MP3, WMA and audio CD in which the “tinny” hollow sound is greatly reduced. HYUNDAI LCD TV HQL260WR/320WR SRS On... -
Page 50: How To Listen To Stereo Sound/Dual Sound
How to Listen to Stereo Sound / Dual Sound - Users can set sound mode as users want. - This function is available only with the remote control. - Listening to stereo sound Press the Mono or Stereo be will selected in turn whenever you press the button. (*During FM MONO broadcast, pressing the - Listening to the Dual sound Press the... - Page 51 • If the signal reception conditions deteriorate, setting to Mono will make your listening condition better. • If the stereo signal is weak and automatic mode switching occurs, then the current mode is switched to the Mono. HYUNDAI LCD TV HQL260WR/320WR On-Screen Indication Mono...
-
Page 53: Channel Setup
Channel Setup How to Store Program Automatically ... 51 How to Edit Program Manually ... 52 Teletext Feature ... 55 Displaying the Teletext Information ... 56... -
Page 54: How To Store Program Automatically
How to Store Program Automatically You can scan channels available to you and their availability depends on your country. Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort the numbers manually and clear any channels you do not wish to watch. -
Page 55: How To Edit Program Manually
Press the Down button and then go to step 11 if you need to set to Fine Tunning. Continued on next page ... HYUNDAI LCD TV HQL260WR/320WR NTSC AUTO button for more than 2 seconds. - Page 56 ... Continued from previous page. Press Left and Right buttons to set to “Fine Tuning”. (Band limit ±2M byte) Press the Down button and then go to step 12 if you need to assign name to channel. Press Left and Right buttons, then cursors are appear and edit is available.
- Page 57 LOCK pad. You can set Channel Lock by pressing this button. You can move to an unwanted channel by using SKIP pad. You can set Channel Skip by pressing this button. HYUNDAI LCD TV HQL260WR/320WR Freq Name Lock Skip DISPLAY(ACTION) button or numeric key pad.
-
Page 58: Teletext Feature
Teletext Feature Most TV channels provide written information services via teletext. Information provided includes with the next entry it is same : - TV programme times - News bulletins and weather forecasts - Sports results - Travel information Teletext information is often divided between several pages displayed in sequence, which can be accessed by : - Entering the number - Selecting a title in a list... -
Page 59: Displaying The Teletext Information
Once press : The letter of the top half page enlarge to double size. SIZE Twice press : The letter of the bottom half page enlarge to double size. Three times press : Return to the normal viewing HYUNDAI LCD TV HQL260WR/320WR FAVORITE HOLD REVEAL... - Page 60 BUTTON INDEX INDEX To display the index page, press the INDEX button. PAGE UP Displays the next page. PAGE DOWN Displays the previous page. You can activate PIP while viewing TTX information. TV or VCR, DVD, PC The TTX function is not available in the PIP image when the PIP is on. The original screen will be restored when the SWAP is active.
-
Page 61: Function Setup
Function Setup How to Select the Aspect Ratio ... 59 How to Freeze Picture ... 60 How to Set Key-Lock ... 61 How to OSD(On-Screen-Display) Display Time ... 62 How to Set No key Operation Auto Power Off ... 63 How to Set No Signal Timeout ... -
Page 62: How To Select The Aspect Ratio
How to Select the Aspect Ratio - Users can adjust Aspect Ratio as users want. - This function is available only with the remote control. Press the ASPECT button, then Aspect Ratio ASPECT changes in order below. Auto 16:9 Auto 16:9 16:9 General broadcast picture... -
Page 63: How To Freeze Picture
The user can temporarily stop the playing picture. Press Still button. Playing picture is stopped. STILL * In PIP mode, the main picture stops. To deselect Still function. Press Still button once more. HYUNDAI LCD TV HQL260WR/320WR 15:9 Zoom1~5 16:9 15:9 in order. Auto... -
Page 64: How To Set Key-Lock
How to Set Key-Lock This is to lock the control buttons on the front top of LCD TV. Press Menu button. MENU Menu items appear on the screen. Press Up and Down buttons to move to “Advanced”. Press Left, Right or OK button to select “Advanced”. -
Page 65: How To Set Osd(On-Screen-Display) Display Time
- If you do not press the MENU button after adjusting the OSD timeout, the menu screen will disappear automatically after the set time. - If you set 0, menu screen will not disappear automatically. HYUNDAI LCD TV HQL260WR/320WR Picture Sound... -
Page 66: How To Set No Key Operation Auto Power Off
How to Set No Key Operation Auto Power Off Automatically turns the power off if there is no button pressed for a period of time after AUTO Wake-Up turns the power on. Press Menu button. MENU Menu items appear on the screen. Press Up and Down buttons to move to “Advanced”. -
Page 67: How To Set No Signal Timeout
Press MENU button after the setting is done, and Menu goes to the previous menu. If the INPUT button is pressed, the menu disappears. If you set the time to 0, the TV will not use the auto power off function. HYUNDAI LCD TV HQL260WR/320WR Picture Sound... -
Page 68: How To Set Your Favorite Channels
How to Set Your Favorite Channels This is to store TV channels or input sources you most frequently use. Press Menu button. MENU Menu items appear on the screen. Press Up and Down buttons to move to “Advanced”. Press Left, Right or OK button to select “Advanced”. -
Page 69: How To Set Noise Reduction And Use Factory Preset
Then, It will recall to the defult. (Except for Favorite Channel and Clock) INPUT Press MENU button after the setting is done, and Menu goes to the previous menu. If the INPUT button is pressed, the menu disappears. HYUNDAI LCD TV HQL260WR/320WR Picture Sound Clock Install... -
Page 70: Displaying Information And Clock
Displaying Information and Clock - You can view the channel information and setting status by pressing the “INFO” button on the remote control. - You can view the clock by pressing the “OK” button on the remote control. INFO In case of applying TV input Press the INFO button. -
Page 71: Choosing Your Language
When it selects, the “>>” mark is indicated. INPUT Press MENU button after the setting is done, and Menu goes to the previous menu. If the INPUT button is pressed, the menu disappears. HYUNDAI LCD TV HQL260WR/320WR Picture Sound Clock... -
Page 73: Clock Setup
Clock Setup How to Set Date and Clock ... 71 How to Set On/Off Time ... 72 How to Set Update Program ... 74 How to Set Sleep Time ... 75... -
Page 74: How To Set Date And Clock
How to Set Date and Clock You can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock if you wish to use the automatic on or off timers. Press Menu button. -
Page 75: How To Set On/Off Time
Press the Right button and then go to step 6 if you need to set Program(TV Channel). Press Up and Down buttons to move to “Program”. And press Right button to select “Program”. Continued on next page ... HYUNDAI LCD TV HQL260WR/320WR Picture Sound Clock Install Language... - Page 76 ... Continued from previous page. (Set the volume level and channel at the time when your LCD turns on.) Press the Up and Down or numeric (0~9) buttons to set the Program(Channel). Press the Right button and then go to step 8 if you need to set the Volume.
-
Page 77: How To Set Update Program
If the INPUT button is pressed, the menu disappears. - You can erase and reset the program number by pressing the OK button. - If you select Pr00, it applies to all programs. HYUNDAI LCD TV HQL260WR/320WR Picture Sound Clock... -
Page 78: How To Set Sleep Time
How to Set Sleep Time This function is available only with the remote control. SLEEP Press the Sleep button, then Sleep Time changes in order below. Sleep off Sleep20 Sleep90 If the Sleep time has been set, “Sleep 1” or “Sleep 2” will be displayed 1 minute or 2 minutes before your TV turns off. -
Page 79: Appendix
Appendix Glossary ... 77 Troubleshooting ... 79 Care and Cleaning ... 81 Product Specifications ... 82... -
Page 80: Glossary
Glossary Component video Composite video S-VIDEO Full Scart Half Scart 480i 480p 720p 1080i Digital television (DTV) HDTV(High Definition TV) SDTV(Standard Definition TV) Cable Broadcast Receiver (Converter) Component video is sent through three cables: two color shade (chrominance) signals and one brightness (luminance) signal. Component video achieves greater color accuracy than composite video or S-VIDEO by splitting chrominance into two separate portions. - Page 81 HYUNDAI LCD TV HQL260WR/320WR Satellite Broadcasting Provides crisp picture and clear audio quality throughout the country via a satellite. VHF/UHF VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300 megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300 to 3,000 megahertz.
-
Page 82: Troubleshooting
Troubleshooting Installation Problems Symptom How can I install an antenna? TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Picture Problems Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on. Vertical and horizontal lines and web patterns briefly appear on the... - Page 83 Adjust the resolution referring to the standard signal mode table. Check the as a PC monitor specification of your video card installed in your PC. If your video card does not but it doesn’t work. work in supported hardware. Try upgrading the video card’s driver. HYUNDAI LCD TV HQL260WR/320WR...
-
Page 84: Care And Cleaning
Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of TV with a fingernail or pointed object. Cleaning Inside When the inside needs to be cleaned, contact a service center or distribution agent where the item is purchased. -
Page 85: Product Specifications
Weight Control Type - Specification is subject to change without notice for performance improvement. - Specification on ‘dead pixel’ of LCD panel applies to ISO13406-2 Standard. HYUNDAI LCD TV HQL260WR/320WR HQL260WR 26" Diagonal (15:9) a-si TFT active matrix 500 :1...
Need help?
Do you have a question about the 320WR and is the answer not in the manual?
Questions and answers
Lost remote control, want to watch a series. Can I use the buttons on the player itself to access the menu?
Yes, the buttons on the Hyundai 320WR player can be used to access the menu. The Up and Down buttons are used to navigate the menu, and the Left and Right buttons are used to change settings. The OK button is used to confirm selections.
This answer is automatically generated