D-Link DIR-615A User Manual page 81

DIR-615A Wireless N300 Router
User Manual
Parameter
Authentication protocol
Encryption protocol
Keep Alive
Dial on demand
Extra options
Static IP address
PPP debug
Select a required authentication method from the drop-down list or
leave the AUTO value.
Select a method of MPPE encryption.
No encryption: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-
•
bit key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MS-CHAP, MS-
CHAPV2, or AUTO value is selected from the Authentication
protocol drop-down list.
Move the switch to the right if you want the router to
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval and LCP fails fields are available. Specify the
required values.
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Fill in the field if you want to use a static IP address to access the
Internet.
Move the switch to the right if you want to log
connection debugging.
Page 81 of 174
Configuring via Web-based Interface
Description
keep you
all data on PPP