DIR-615A Wireless N300 Router
User Manual
LAN
To configure the router's local interface, proceed to the Connections Setup / LAN page.
IPv4
Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 73. Configuring the local interface. The IPv4 tab. The IP section.
Parameter
IP address
Netmask
Figure 74. Configuring the local interface. The IPv4 tab. The DHCP section.
IP
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Page 89 of 174
Configuring via Web-based Interface
Description