Operation With Current-Impulse Switches - Gira TeleCoppler 2 Operating Instructions Manual

3.2 Connections
3.2.7

Operation with Current-Impulse Switches

The TeleCoppler 2 is drafted
for switching electrical devices
by telephone. Each switching
process by telephone is
saved in the TeleCoppler 2.
And on request, the an-
nouncement is made, whether
the connected devices are
switched on or off.
For some applications the in-
stallation of an additional local
switching possibility is usefull
or even necessary. For exam-
ple, a motion detector at a va-
cation home can be switched
on by telephone from the dis-
conventional device
(230 V)
tance and at arrival at the
home switched off by pushing
the (locally) installed external
alarm push-button.
By appropriate settings in the
menu, the switching outputs
A1 to A6 are configurated as
current-impulse outputs. Cur-
rent-impulse switches with 2
make contacts or change-over
contacts should be used in
order to transmit the present
switching state of the current-
impulse switches to the input
by way of these make con-
tacts or change-over con-
as A1
current-
impulse
switch
12 V DC
push-button for
manual switching
tacts. The inputs S1 to S2
render the correct switching
state of the current-impulse
switches. This is important
because the announcements
are referring to the respective
states of the inputs (S1 to S6)
and not directly to the states
of the switching outputs (A1
to A6).
3 Installation 13