Advertisement
Wireless switching/dimming top unit, 1-gang
Product characteristics
-
Evaluation of extensions
-
Scene operation possible
-
Status indication with LED
-
Status feedback to radio transmitter
-
Switch-on brightness can be saved permanently when combined with flush-mounted
inserts for dimming
Can be set with eNet server:
-
Maximum brightness
-
Minimum brightness
-
Dimming speed
-
Switch-on delay / switch-off delay
-
Dim up/dim down ramp
-
Switch-off warning
-
Operation locks
-
Continuous on, Continuous off
-
Hotel function
-
Run-on time
-
Light control
Supplementary functions with eNet Server:
-
Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
-
Update of the device software
-
Reading of error memory
Response after mains voltage return
The response after mains voltage return can be configured with the eNet Server. Default
setting: Off.
4 Operation
i When operating with the eNet Server, operation and signalling could vary from what is
described here.
Operation is performed directly on the device or on a connected extension.
i If operation takes place with radio transmitters, please observe the radio transmitter
instructions.
Switch light
o
Press button for less than 0.4 seconds.
The light is switched on or off. In combination with inserts for dimming, switch-on takes
place at the saved switch-on brightness.
Status-LED (4) lights up: output is switched on.
Status-LED (4) off: output is switched off.
i In the case of the HVAC insert, only the output Kanal 1 is switched, whilst the output HLK
switches according to the output Kanal 1 (see operation manual of the insert).
Adjust the brightness
Button is combined with an insert for dimming.
Light is switched on.
o
Press top button for longer than 0.4 seconds.
The light gets brighter up to maximum brightness.
o
Press bottom button for longer than 0.4 seconds.
Light gets darker to minimum brightness.
i Push-button: the light becomes brighter up to maximum brightness, remains there briefly
and becomes dimmer down to minimum brightness, remains there briefly and becomes
brighter again. This process repeats for as long as the push-button remains pressed.
Switch light on with minimum brightness
Button is combined with an insert for dimming.
32582722
10864994
27.04.2017
2/15
Advertisement
