Each Zeversolar inverter is set to a default grid code which is based on the serial number suffix that can be found on the label affixed to the inverter and its packaging, see Fehler! Verweisquelle konnte nicht gefunden werden.
Austria, Belgium, France, Greece, Northern Ireland, Poland, Republic of Ireland, Switzerland, Turkey. Please note: please refer to the Certificate Overview available from the Zeversolar website to determine for which regions the Zeversolar inverters are certified. 1.5 Hardware Requirements ...
1.7 Grid Code Set-Up It is necessary to ensure that the inverter has been isolated from the AC supply. To change the grid code please follow the steps outlined in Table 2. Steps Images Navigate to the “Menu” screen by pressing the Enter button on the front panel.
Page 8
6. On the “Safety” menu the grid code shown as “Standard” will be the first item highlighted. 7. To change the “Standard” use the arrow keys to scroll through the list of grid codes. When the correct grid code is selected, press enter...