Module Programming Procedure - FlashLogic FLRSGM10 Install Manual

01
Close driver door.
02
Re-open driver door to wake up data bus.
03
Insert key into ignition.
ACC ON
OFF START
04
Turn key to ACC position.
ACC ON
START
OFF
05
Wait, LED 1 will turn solid RED.
06
Turn key to ON position.
ACC ON
START
OFF
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2017
MODULE PROGRAMMING PROCEDURE - 1 OF 1
07
Wait, LED 1 will turn solid GREEN for 2
seconds. (This may take up to 1 minute.)
08
Turn key to OFF position.
ACC ON
OFF START
09
Module Programming Procedure completed.
FLC-GM(RS)-GM10-[FLRSGM10]-EN
PAGE 11 OF 20
• 20170427
DOC.: #38693
www.flashlogic.com