Valet Mode Programming Procedure - FlashLogic FLRSGM10 Install Manual

>>
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
01
Time restriction. Complete next step within 7
seconds.
02
Cycle ignition ON fi ve times [5x OFF/ON]
rapidly.
OFF ACC ON ON START
ENGINE
START
STOP
03
Wait, LED 1 will turn solid RED for 2 seconds.
04
Set ignition to OFF position.
OFF OFF ACC ON START
ENGINE
START
STOP
05

Valet Mode Programming Procedure

completed.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2017
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
>>
To exit valet mode: repeat steps 1 to 5.
FLC-GM(RS)-GM10-[FLRSGM10]-EN
PAGE 12 OF 20
• 20170427
DOC.: #38693
www.flashlogic.com