Remote Starter Error Codes - FlashLogic FLRSGM10 Install Manual

REMOTE STARTER ERROR CODES:

NOTES
I WARNING: The following applies only when the parking
lights are connected and supported by the system.
II After a remote starter failure, the parking lights will fl ash
[X] number times to indicate an error code. See table.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2017
REMOTE STARTER ERROR CODES - 1 OF 1
03 Foot brake is ON.
04 Hood is open.
05 Engine tach signal is lost.
06 System is in Valet Mode.
07 Vehicle is moving (VSS).
08 Glow plug timeout error.
09 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
10 N/A
11 N/A
12 N/A
13 N/A
14 N/A
15 N/A
16 CAN communication failure during RS sequence.
FLC-GM(RS)-GM10-[FLRSGM10]-EN
PAGE 17 OF 20
• 20170427
DOC.: #38693
www.flashlogic.com