Connecting Pressure Sensor And/Or Flow Sensor - Danfoss DHP-M Installation Manual

Installation Guide
7.13

Connecting pressure sensor and/or flow sensor

7.14 Connecting EVU
7.15 Connection for external sum alarm
Potential-free relay output.
7.16 Connecting control signal (start/stop) for auxiliary heating
Potential-free relay output.
Connection 0-10V
▪ 24V: Connect control signal to terminal block 24 and GND to terminal block 25. Power supply is drawn from terminal blocks 54-55,
56-57 or 58-59.
▪ 230V: Power supply is drawn from terminal blocks 50 and N.
28
DHP-M
VIJSW102 Danfoss Heating Solutions