Honeywell SPM Flex User Manual page 18

Single point monitor gas detector

Hide thumbs Also See for SPM Flex:

Table of Contents

SPM Flex Gas Detector

If there is an error (i�e�, the same cartridge was reinserted, the new cartridge has

expired, or an unqualified user is attempting to insert a cartridge that detects

a different gas than the last one), an error message will be displayed and the

installation will be canceled� If the installation is successful, a summary of the

current configuration will be displayed and the user can then choose whether to

enter Monitor Mode or exit the Change Chemcassette Mode out of monitor�

Removing a Chemcassette cartridge

1� Navigate to Maintenance > Open/Close gate�

2� Select "Open Gate�"

3� Remove the cartridge�

4� Select "Close Gate�"

Changing the selected gas

1� While out of monitor mode, navigate to Set-up > Monitoring > Gas�

2�

Select "Current gas" and pick the desired gas from the selection box

3�

Select "Save�"

Entering monitor mode

From the main menu, navigate to the "Monitor Mode" option and select "Enter

monitor mode�"

1� If a Chemcassette cartridge has been installed, the detector will enter Monitor

Mode�

2� If a Chemcassette cartridge has not been installed, a user with the necessary

passcode can inititate the Chemcassette wizard� Otherwise, the detector will

not enter monitor mode�

Table of Contents