The Handle (Portable Model); Opening The Cover - Honeywell SPM Flex User Manual

SPM Flex Gas Detector

The handle (portable model)

The detector can be conveniently carried with the optional handle, which is
mounted onto the cover at three locations� If necessary, the handle can be
removed by the user by removing two bolts� All of the detector's functions can be
performed with the handle attached� The handle swings out of the way for access
to the Chemcassette cartridge area�

Opening the cover

Figure 2. Opening the detector cover
Release the cover by first unscrewing the handle pin� Pivot the handle up as
shown in the illustration and push down the four latches (two on each side)�
The detector cover will then be free to swing open, allowing a Chemcassette
cartridge to be inserted or replaced, the power switch to be turned on or off, or
the USB data port to be accessed�
11