Enabling Wireless Connection; Wireless Network Setup - ELECTROCOMPANIET ECM 1 Owner's Manual

ENABLING WIRELESS CONNECTION

This step is only necessary if you want the system connected to your wireless network.
If you want to continue using wired connection (LAN cable), simply skip this page
(We recommend using wired connection if possible to reduce Wi-Fi traffic and
achieve best possible stability for the system.)

Wireless network setup:

1. Start the EC Remote App.
2. Tap SETTINGS at the main menu.
3. Tap NETWORK.
4. Scroll down and tap CONNECT TO NETWORK .
5. Select your wireless network. (Mobile/tablet must be on the same network)
6. Enter your password, tap "Join" or "OK"
7. Remove the LAN cable and wait until the ZONE button appear.
Tap ZONE and reselect your EC Living system.
If you loose connection with the system, reconnect the network cable and
check your network password carefully.
RESET SPDIF
OUTPUT
COAX
13
MODEL: ECM 1
MADE IN NORWAY
ON/OFF VOLTAGE SELECTOR
ELECTROCOMPANIET
ENG
.