Table of Contents
Advertisement
-
In the event of a malfunction in the appliance, disconnect all power supplies and call
technical support.
-
If a fault occurs repeatedly, technical support must be called.
Before switching on and using the appliance for the first time, it is essential to carefully
-
clean the oven interior and any accessories that come into contact with food.
CONTROL PANEL fig.2
SWITCHING ON (fig.2)
Operate the main switch upstream of the appliance.
-
Press the ON-OFF button (1); displays 3, 10 and 11 come on. The appliance is now ready
-
for you to set the temperatures and the timer (see paragraphs "SETTING AND USING
THE TIMER" and "SETTING THE TEMPERATURE").
-
If you press the ON-OFF button again; the orange LED indicator (2) comes on and the
oven begins to heat.
SETTING AND USING THE TIMER (fig.2)
-
Switch on the oven (see paragraph "Switching on").
-
The display (3) shows the time on 3 fields.
-These fields represent the following respectively: minutes, tenths of seconds and
-
seconds, up to a maximum of 9 minutes and 59 seconds. If the time is increased over 9
minutes and 59 seconds, the three fields represent the following respectively: hours,
tenths of minutes, and minutes, up to a maximum of 9 hours and 59 minutes.
Instruction AGS 646-WP- rev9 english
USER INSTRUCTIONS
ed.05
Page 8 di 15
Advertisement
Table of Contents
