Table of Contents
Advertisement
DESIGN CHARACTERISTICS
-
Load-bearing structure of stainless steel with 4 feet adjustable in height.
-
Digital controls: start-stop / temperature / timer / interior light – heating is provided by two
shielded resistors equipped with a motor-fan.
-
Temperature is controlled electronically, and goes ahead from room temperature to
450°C.
-
Safety thermostat to protect against failure of the temperature control sensors.
-
Recirculating fan.
-
Orange LED is lit when the appliance is in use.
-
Oven interior light.
POSITIONING, INSTALLATION AND MAINTENANCE
POSITIONING
-
After removing all the packaging materials, check the appliance for damage. If there are
any signs of damage, do not connect the appliance, but contact the sales outlet
immediately.
-
Remove the protective PVC film from the panels.
-
Dispose of the packaging materials as required by the regulations. The materials are
normally divided up by type and given to the municipal refuse collection department.
Fig. A
- THE 2002/96/EC (WEEE) DIRECTIVE: INFORMATION TO USERS
This informational note is meant only for owners of equipment marked with the symbol shown
in Fig. A on the adhesive label featuring the technical specifications applied on the actual
product (the label also giving the serial number):
This symbol indicates that the product is classified, according to the regulations in force, as
an item of electrical and electronic equipment and conforms to EU Directive 2002/96/EC
(WEEE) meaning that, at the end of its service life, it must be treated separately from
domestic waste, i.e. it must be handed in free of charge to a separate waste electrical and
electronic equipment collection centre or returned to the reseller when buying a new
equivalent item of equipment.
The user is responsible for delivering the unit at the end of its life to the appropriate collection
facilities. Failure to do so shall result in the user being subject to the penalties prescribed by
the legislation in force on waste.
Suitable separated collection so that the unit no longer used can be sent off for
environmentally compatible recycling, treatment and disposal helps avoid possible negative
effects on the environment and on health and facilitates the recycling of the product's
component materials.
For more detailed information on available collection systems, contact the local waste
disposal service or the shop you purchased the unit from.
Instruction AGS 646-WP- rev9 english
ed.05
Page 5 di 15
Advertisement
Table of Contents
