Dodge RAM ProMaster 2014 User Manual page 51

Table of Contents

Advertisement

• During extremely cold temperatures, the transmission will not operate if the oil
temperature is -22°F (-30°C) or below. Allow the engine to idle briefly to warm the
fluid. Normal operation will resume once the transmission temperature has risen
to a suitable level.
You or others could be injured if you leave the vehicle unattended without fully
applying the parking brake. The parking brake should always be applied when the
driver is not in the vehicle, especially on an incline.
Shifting The Transmission
The transmission shift lever has REVERSE (R), NEUTRAL (N), DRIVE (D) and
MANUAL (M) positions. In the MANUAL (M) position, the lever can be toggled
rearward or forward (+/-) to upshift or downshift the transmission to the next gear. The
actual transmission gear range (R, N, D, 1, 2, 3, 4, 5, or 6) is displayed in the EVIC
whenever the engine is running.
When the key is turned OFF, the transmission remains in its previous gear position,
regardless of the shift lever position. With key on/engine off, the display may indicate
the shift lever position rather than the actual transmission gear position.
Although the shift lever can be moved freely the transmission will not actually shift
unless the brake pedal is pressed, therefore the shift lever and display may not
correspond to the actual transmission gear range. To shift the transmission to a
particular gear range (with key on/engine off), press and hold the brake pedal, move
the shift lever to NEUTRAL (N), then move the shift lever to the desired position.
To drive, start the engine, then move the shift lever from NEUTRAL (N) to the DRIVE
(D) position for automatic mode, the MANUAL (M) position for manual mode or the
REVERSE (R) position.
NOTE:
Only shift into DRIVE (D) or REVERSE
(R) when the accelerator pedal is re-
leased and the vehicle is stopped. Be
sure to keep your foot on the brake pedal
when shifting between these gears.
WARNING!
DIESEL
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents