Dodge RAM PROMASTER CITY 2018 User Manual
  1. Manuals
  2. Brands
  3. Dodge Manuals
  4. Automobile
  5. RAM PROMASTER CITY 2018
  6. User manual

Dodge RAM PROMASTER CITY 2018 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

2018
RAM
PROMASTER CITY
USER
GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Dodge RAM PROMASTER CITY 2018

Summary of Contents for Dodge RAM PROMASTER CITY 2018

  • Page 1 2018 PROMASTER CITY USER GUIDE...
  • Page 2 IMPORTANT Get warranty and other information online – you can review and print or download a copy of the Owner’s Manual, Navigation/Uconnect manuals and the limited warranties provided by FCA US LLC for your vehicle by visiting www.mopar.com (U.S.) or www.owners.mopar.ca (Canada). Click on the applicable link in the “Popular Topics”...
  • Page 3 Congratulations on selecting your new FCA available or were not ordered on this vehicle. (U.S. Residents) or www.owners.mopar.ca (Ca- US LLC vehicle. Be assured that it represents Please disregard any features and equipment nadian Residents) for further information. For precision workmanship, distinctive styling, described in this guide that are not available your convenience, the information contained and high quality.
  • Page 4 HOW TO USE THIS MANUAL that on vehicles with steering wheel on the Symbols right side, the position or construction of Some vehicle components have colored la- Essential Information some controls is not exactly mirror-like with bels whose symbols indicate precautions to respect to the figure.
  • Page 5 GRAPHICAL TABLE OF CONTENTS GETTING TO KNOW YOUR VEHICLE GETTING TO KNOW YOUR INSTRUMENT PANEL SAFETY STARTING AND OPERATING IN CASE OF EMERGENCY SERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS MULTIMEDIA CUSTOMER ASSISTANCE INDEX...
  • Page 7 GRAPHICAL TABLE OF CONTENTS GRAPHICAL TABLE OF CONTENTS INSTRUMENT PANEL ... . .6 INTERIOR.....7...
  • Page 8 INSTRUMENT PANEL Instrument Panel 1 — Air Vents 4 — Windshield Wiper Lever 2 — Multifunction Lever 5 — Radio 3 — Instrument Cluster 6 — Steering Wheel...
  • Page 9 INTERIOR Interior 1 — Door Locks/Window Switches 4 — Climate Controls 2 — Seats 5 — Switch Panel 3 — Gear Selector 6 — Glove Compartment...

  • Page 11: Table Of Contents

    GETTING TO KNOW YOUR VEHICLE GETTING TO KNOW YOUR VEHICLE KEYS ..... .10 EXTERIOR LIGHTS ....16 CLIMATE CONTROLS .

  • Page 12: Keys

    KEYS NOTE: The key fob may not be able to be detected by Key Fob the vehicle if it is located next to a mobile phone, laptop or other electronic device; Your vehicle uses a key start ignition system. these devices may block the key fob’s wire- The ignition system consists of a key fob with less signal.

  • Page 13: Seats

    Passenger Vehicle maintenance procedures, refer SEATS “Dealer Service” in “Servicing And Mainte- Push and release the unlock button on key Seats are a part of the Occupant Restraint nance” Owner’s Manual fob to unlock all doors. Push and release the System of the vehicle.

  • Page 14: Folding Rear Seat - If Equipped

    Folding Rear Seat — If Equipped WARNING! To provide additional storage area, each rear • Persons who are unable to feel pain to seat can be folded flat to allow for extended the skin because of advanced age, cargo space. chronic illness, diabetes, spinal cord in- jury, medication, alcohol use, exhaus- 1.

  • Page 15: Head Restraints

    HEAD RESTRAINTS Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is located above the top of your ear. WARNING! •...

  • Page 16: Front Adjustment

    Front Adjustment Rear Adjustment To raise the head restraint, push the adjust- The center head restraint is adjustable and ment button, located on the base of the head removable. To raise the head restraint, push restraint, pull upward on the head restraint. and hold the adjustment button, located on To lower the head restraint, push the adjust- the base of the head restraint and pull up-...

  • Page 17: Front Removal

    WARNING! WARNING! head restraints in a location outside the A loose head restraint thrown forward in a occupant compartment. collision or hard stop could cause serious • ALL the head restraints MUST be rein- injury or death to occupants of the vehicle. stalled in the vehicle to properly protect Always securely stow removed head re- the occupants.

  • Page 18: Steering Wheel

    WARNING! WARNING! • A loose head restraint thrown forward in Do not adjust the steering column while driving. Adjusting the steering column a collision or hard stop could cause while driving or driving with the steering serious injury or death to occupants of column unlocked, could cause the driver the vehicle.

  • Page 19: Headlights

    will illuminate in the cluster to indicate the Deactivation high beams are on. Pull the multifunction Pull the multifunction lever toward the steer- lever a second time to switch the headlights ing wheel and hold it for more than two back to low beam.

  • Page 20: Interior Lights

    INTERIOR LIGHTS Front Wiper Operation Low Speed Rotate the end of the lever upward to the There are five different modes of operation The map lights and dome lights are mounted second detent. The wipers will operate at low for the front windshield wipers. The wind- between the sun visors on the overhead con- speed.

  • Page 21: Rear Wiper Operation

    Manual High Speed/Mist • In continuous mode while vehicle is in CAUTION! REVERSE. Push the lever upward from the off position. • Turn the windshield wipers off when The wipers will operate at high speed to clear With the windshield wipers on, and REVERSE driving through an automatic car wash.

  • Page 22: Climate Controls

    CLIMATE CONTROLS Manual Climate Control Overview Manual Climate Controls 1 — A/C Button 4 — Mode Control Knob 2 — Air Recirculation Button 5 — Blower Control Knob 3 — Rear Window Defroster/Heated Mirrors Button 6 — Temperature Control Knob...
  • Page 23 Manual Climate Control Descriptions Icon Description A/C Button Push the A/C button to engage the Air Conditioning (A/C). A LED will illuminate when the A/C system is engaged. The A/C can be deselected manually without disturbing the mode control selection. Recirculation Button Press and release this button to change the system between recirculation mode and outside air mode.
  • Page 24 Icon Description Temperature Control Use this control to regulate the temperature of the air inside the passenger compartment. Rotating the knob counter- clockwise, from top center into the blue area of the scale, indicates cooler temperatures. Rotating the knob clockwise, into the red area, indicates warmer temperatures.

  • Page 25: Climate Control Functions

    Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister out- lets. Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy con- ditions that require extra heat to the windshield.

  • Page 26: Operating Tips

    NOTE: NOTE: Winter Operation In cold weather, use of recirculation mode • If fog or mist appears on the windshield or To ensure the best possible heater and de- may lead to excessive window fogging. On side glass, select Defrost mode and in- froster performance, make sure the engine systems with Manual Climate Controls, the crease blower speed if needed.

  • Page 27: Hood

    Window Fogging www.mopar.com/en-us/care/owners-manual.html CAUTION! (U.S. Residents) or www.owners.mopar.ca Vehicle windows tend to fog on the inside of (Canadian Residents) for filter replacement Be sure to disengage the rod and secure it the glass in mild, rainy and/or humid weather. instructions. in close position before closing the hood.

  • Page 28: Internal Equipment

    INTERNAL EQUIPMENT Load Compartment Power Outlet The Load Compartment Power Outlet is lo- Power Outlets cated on the left side of the rear cargo com- partment. It operates with the ignition key in Passenger Compartment Power Outlets the MAR (ACC/ON/RUN) position. The outlet The cigar lighter and the power socket are can be used for powering 12 Volt adaptive located in the center console, and both oper-...

  • Page 29: Cigar Lighter And Ash Receiver - If Equipped

    Push the cigar lighter button to activate the WARNING! CAUTION! cigar lighter when the ignition key is in the • Close the lid when not in use and while will degrade the battery even more MAR (ON/RUN) position. driving the vehicle. quickly.
  • Page 31 GETTING TO KNOW YOUR INSTRUMENT PANEL GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY ..30 Yellow Warning Lights ... .34 ONBOARD DIAGNOSTIC SYSTEM — OBD II .....38 Yellow Indicator Lights .

  • Page 32: Instrument Cluster Display

    INSTRUMENT CLUSTER DISPLAY The menu items described below are an ex- ample of what can be found in the vehicle's Your vehicle may be equipped with an instru- menu: ment cluster display, which offers useful in- • Dimmer formation to the driver. With the ignition in •...

  • Page 33: Warning Lights And Messages

    • UP Arrow Button Selecting An Option Of The Main Menu With WARNING LIGHTS AND MESSAGES Push and release the up arrow button to Submenu: scroll upward through the main menu and Red Warning Lights 1. Briefly push and release the MENU button submenus.
  • Page 34 If the light remains on when the parking NOTE: The light should illuminate for approximately brake has been disengaged, and the fluid The light may flash momentarily during sharp two seconds. The light should then turn off level is at the full mark on the master cylinder cornering maneuvers, which change fluid unless the parking brake is applied or a brake reservoir, it indicates a possible brake hy-...
  • Page 35 NOTE: remain on briefly as a bulb check. If the light — Oil Pressure Warning Light does not come on during starting, have the If the vehicle is moving and a door is opened, This light indicates low engine oil pressure. If system checked by an authorized dealer.

  • Page 36: Yellow Warning Lights

    — Transmission Fault Warning Light required. However, the conventional brake WARNING! system will continue to operate normally if This light will illuminate (together with a Light is illuminated you could cause the the brake warning light is not on. message in the instrument cluster display fluid to boil over, come in contact with hot If the ABS light is on, the brake system and a buzzer) to indicate a transmission...
  • Page 37 — Tire Pressure Monitoring System vehicle placard or tire inflation pressure la- Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when bel. (If your vehicle has tires of a different (TPMS) Warning Light the system is not operating properly. The size than the size indicated on the vehicle The warning light switches on and a message TPMS malfunction indicator is combined...
  • Page 38 — Engine Check/Malfunction Indica- CAUTION! WARNING! tor Warning Light (MIL) The TPMS has been optimized for the A malfunctioning catalytic converter, as The Engine Check/Malfunction Indicator original equipment tires and wheels. referenced above, can reach higher tem- Light (MIL) is a part of an Onboard Diagnostic TPMS pressures and warning have been peratures than in normal operating condi- System called OBD II that monitors engine...

  • Page 39: Yellow Indicator Lights

    — Electronic Stability Control (ESC) • The ESC system will make buzzing or click- If equipped with a block heater harness the ing sounds when it is active. This is normal; message "Engine Heater Recommended", Warning Light — If Equipped the sounds will stop when ESC becomes will be displayed in the instrument cluster The “ESC Indicator Light”...

  • Page 40: Blue Indicator Lights

    — Front Fog Indicator Light — If ONBOARD DIAGNOSTIC SYSTEM — CAUTION! Equipped OBD II economy and driveability. The vehicle This indicator will illuminate when the front must be serviced before any emissions Your vehicle is equipped with a sophisticated fog lights are on.
  • Page 41 WARNING! connection port in order to diagnose or service your vehicle. • If unauthorized equipment is connected to the OBD II connection port, such as a driver-behavior tracking device, it may: • Be possible that vehicle systems, including safety related systems, could be impaired or a loss of ve- hicle control could occur that may result in an accident involving seri-...
  • Page 43 SAFETY SAFETY AUXILIARY DRIVING SYSTEMS ..42 Seat Belt Systems....46 Transporting Passengers ...75 Supplemental Restraint Systems Exhaust Gas .

  • Page 44: Auxiliary Driving Systems

    AUXILIARY DRIVING SYSTEMS The TPMS will warn the driver of a low tire NOTE: pressure if the tire pressure falls below the When filling warm tires, the tire pressure may Tire Pressure Monitoring System low-pressure warning limit for any reason, need to be increased up to an additional 4 psi including low temperature effects and natu- (30 kPa) above the recommended cold plac-...
  • Page 45 NOTE: Base System CAUTION! • The TPMS is not intended to replace nor- • The TPMS has been optimized for the This is the TPMS warning indicator mal tire care and maintenance or to provide original equipment tires and wheels. located in the instrument cluster.
  • Page 46 Tire Pressure Monitoring Low Pressure exists. The Tire Pressure Monitoring Telltale 2. Compact Spare Tire – if equipped: The Light will turn off when the fault condition no compact spare wheel is not equipped with Warnings longer exists. A system fault can occur with TPMS sensor.

  • Page 47: Occupant Restraint Systems

    6. In case of tire replacement, if the vehicle OCCUPANT RESTRAINT SYSTEMS 1. Children 12 years old and under should is driven for short periods of time, then the always ride buckled up in a vehicle with a Some of the most important safety features in system can take a while to be restored.

  • Page 48: Seat Belt Systems

    6. All occupants should always wear their lap seat BeltAlert) to buckle their seat belts. The WARNING! Belt Alert feature is active whenever the igni- and shoulder belts properly. • Only use a rear-facing child restraint in a tion switch is in the START or ON/RUN posi- 7.
  • Page 49 BeltAlert warning sequence starts by blinking the rear seat (if equipped) in pet harnesses or WARNING! the Seat Belt Reminder Light and sounding pet carriers that are secured by seat belts, an intermittent chime. Once the BeltAlert and cargo is properly stowed. •...
  • Page 50 WARNING! WARNING! WARNING! • Be sure everyone in your vehicle is in a • A seat belt that is worn under your arm is • A lap belt worn too high can increase the seat and using a seat belt properly. Oc- dangerous.
  • Page 51 Lap/Shoulder Belt Operating Instructions rear seat). Grasp the latch plate and pull Lap/Shoulder Belt Untwisting Procedure out the seat belt. Slide the latch plate up Use the following procedure to untwist a the webbing as far as necessary to allow twisted lap/shoulder belt.
  • Page 52 As a guide, if you are shorter than average, NOTE: Seat Belts And Pregnant Women you will prefer the shoulder belt anchorage in The adjustable upper shoulder belt anchor- a lower position, and if you are taller than age is equipped with an Easy Up feature. This average, you will prefer the shoulder belt feature allows the shoulder belt anchorage to anchorage in a higher position.
  • Page 53 Seat Belt Pretensioner Energy Management Feature The front seat belt system is equipped with The front seat belt system is equipped with pretensioning devices that are designed to an Energy Management feature that may help remove slack from the seat belt in the event further reduce the risk of injury in the event of of a collision.
  • Page 54 In Automatic Locking Mode, the shoulder 3. Allow the seat belt to retract. As the seat belt is automatically pre-locked. The seat belt retracts, you will hear a clicking belt will still retract to remove any slack in sound. This indicates the seat belt is now the shoulder belt.

  • Page 55: Supplemental Restraint Systems (Srs)

    • Instrument Panel the ignition switch is in the MAR/ACC/ON/ WARNING! RUN position. After the self-check, the Air • Knee Impact Bolsters used to install rear-facing or forward- Bag Warning Light will turn off. If the ORC • Driver and Front Passenger Air Bags facing child restraints that have a har- detects a malfunction in any part of the ness for restraining the child.
  • Page 56 NOTE: of the steering wheel. The passenger front air WARNING! If the speedometer, tachometer, or any en- bag is mounted in the instrument panel, gine related gauges are not working, the Oc- above the glove compartment. The words • Being too close to the steering wheel or cupant Restraint Controller (ORC) may also “SRS AIRBAG”...
  • Page 57 The first stage inflator is triggered immedi- Because air bag sensors measure vehicle de- WARNING! celeration over time, vehicle speed and dam- ately during an impact that requires air bag are designed to open only when the air age by themselves are not good indicators of deployment.
  • Page 58 Knee Impact Bolsters Supplemental Side Air Bags The SABs may help to reduce the risk of occupant injury during certain side impacts, The Knee Impact Bolsters help protect the Supplemental Seat-Mounted Side Air Bags in addition to the injury reduction potential knees of the driver and front passenger, and (SABs) provided by the seat belts and body structure.
  • Page 59 Supplemental Side Air Bag Inflatable Curtains SABICs may help reduce the risk of head and WARNING! (SABICs) other injuries to front and rear seat outboard ment path are located should remain occupants in certain side impacts, in addi- This vehicle is equipped with Supplemental free from any obstructions.
  • Page 60 deploy independently; a left side impact de- WARNING! WARNING! ploys the left Side Air Bags only and a right- sion. The Side Air Bags work with your inflate, even if they are in an infant or side impact deploys the right Side Air Bags seat belt to restrain you properly.
  • Page 61 rollover or near rollover event, and deploy- • Supplemental Knee Air Bags • As the air bags deflate, you may see some ment of the Side Air Bags is appropriate, the smoke-like particles. The particles are a • Front and Side Impact Sensors normal by-product of the process that gen- rollover sensing system will also deploy the •...
  • Page 62 NOTE: Enhanced Accident Response System Reset WARNING! Procedure • Air bag covers may not be obvious in the • It is dangerous to try to repair any part of interior trim, but they will open during air In order to reset the Enhanced Accident Re- the air bag system yourself.

  • Page 63: Child Restraints

    Event Data Recorder (EDR) are recorded by the EDR under normal driving Children 12 years or younger should ride properly buckled up in a rear seat, if avail- conditions and no personal data (e.g., name, This vehicle is equipped with an event data able.
  • Page 64 Before buying any restraint system, make NOTE: • Canadian residents should refer to Transport sure that it has a label certifying that it meets Canada’s website for additional information: • For additional information, refer all applicable Safety Standards. You should http://www.tc.gc.ca/eng/motorvehiclesafety/ www.safercar.gov/parents/index.htm or call also make sure that you can install it in the...
  • Page 65 All children whose weight or height is above WARNING! WARNING! the forward-facing limit for the child seat the vehicle seat has been adjusted, re- should use a belt-positioning booster seat • Never place a rear-facing child restraint install the child restraint. until the vehicle’s seat belts fit properly.
  • Page 66 3. Does the shoulder belt cross the child’s If the shoulder belt contacts the face or neck, Recommendations For Attaching Child Re- shoulder between their neck and arm? move the child closer to the center of the straints vehicle, or use a booster seat to position the 4.
  • Page 67 Lower Anchors And Tethers For CHildren for CHildren. The LATCH system has three LATCH Positions For Installing Child Re- vehicle anchor points for installing LATCH- straints In This Vehicle (LATCH) Restraint System equipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seat- ing position.
  • Page 68 Frequently Asked Questions About Installing Child Restraints With LATCH Do not use the seat belt when you use the LATCH anchorage system to attach a rear- Can the LATCH anchorages and the seat belt facing or forward-facing child restraint. be used together to attach a rear-facing or Booster seats may be attached to the LATCH forward-facing child restraint? anchorages if allowed by the booster seat...
  • Page 69 Locating The LATCH Anchorages Locating The Upper Tether Anchorages and some rear-facing child restraints will also be equipped with a tether strap. The tether strap will have a hook at the end to attach to The lower anchorages are round bars that are There are tether strap anchorages behind the top tether anchorage and a way to tighten found at the rear of the seat cushion where it...
  • Page 70 To Install A LATCH-Compatible Child Re- 3. Attach the lower hooks or connectors of play with it and accidentally lock the seat belt the child restraint to the lower anchorages retractor. Before installing a child restraint straint In Vehicles With Rear Seating in the selected seating position.
  • Page 71 Lap/Shoulder Belt Systems For Installing WARNING! WARNING! Child Restraints In This Vehicle for attaching other items or equipment • Follow the child restraint manufacturer’s to the vehicle. directions exactly when installing an in- fant or child restraint. Installing Child Restraints Using The Ve- The seat belts in the passenger seating posi- hicle Seat Belt In Vehicles With Rear Seat- tions are equipped with a Switchable Auto-...
  • Page 72 Frequently Asked Questions About Installing Child Restraints With Seat Belts Contact between the front passenger seat and Can the rear-facing child restraint touch the the child restraint is allowed, if the child re- back of the front passenger seat? straint manufacturer also allows contact. Second Row: The head restraints may be re- Can the head restraints be removed? moved from all positions.
  • Page 73 7. Finally, pull up on any excess webbing to Installing Child Restraints Using The Top to move the seat forward to provide better tighten the lap portion around the child access to the tether anchorage. If there is Tether Anchorage restraint while you push the child restraint no top tether anchorage for that seating rearward and downward into the vehicle...
  • Page 74 Installing Child Restraints Using The Ve- WARNING! hicle Seat Belt In Vehicles Without Rear slip into the opening between the seat- Seating backs as you remove slack in the strap. Child restraint systems are designed to be Installing Child Restraints In Commercial secured in vehicle seats by lap belts or the Vehicles lap belt portion of a lap/shoulder belt.
  • Page 75 the ALR will make a clicking noise while the Installing A Child Restraint With A Switch- 5. To lock the seat belt, pull down on the webbing is pulled back into the retractor. For shoulder part of the belt until you have able Automatic Locking Retractor (ALR): additional information on ALR, refer to the pulled all the seat belt webbing out of the...
  • Page 76 9. Test that the child restraint is installed 2. Route the tether strap to provide the most tightly by pulling back and forth on the direct path for the strap between the an- child seat at the belt path. It should not chor and the child seat.

  • Page 77: Transporting Pets

    SAFETY TIPS Exhaust Gas WARNING! WARNING! An incorrectly anchored tether strap could Transporting Passengers lead to increased head motion and pos- Exhaust gases can injure or kill. They con- sible injury to the child. Use only the NEVER TRANSPORT PASSENGERS IN THE tain carbon monoxide (CO), which is col- anchorage position directly behind the CARGO AREA.

  • Page 78: Safety Checks You Should Make Inside The Vehicle

    The best protection against carbon monoxide Front seat belt assemblies must be replaced Defroster after a collision. Rear seat belt assemblies entry into the vehicle body is a properly Check operation by selecting the defrost must be replaced after a collision if they have maintained engine exhaust system.
  • Page 79 WARNING! WARNING! WARNING! clutch pedals and cause a loss of vehicle • ONLY use the driver’s side floor mat on jects could change the position of the control. To prevent SERIOUS INJURY or the driver’s side floor area. To check for floor mat and may cause interference DEATH: interference, with the vehicle properly...

  • Page 80: Periodic Safety Checks You Should Make Outside The Vehicle

    Periodic Safety Checks You Door Latches Should Make Outside The Vehicle Check for proper closing, latching, and lock- ing. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear patterns. Check for stones, Check area under the vehicle after overnight nails, glass, or other objects lodged in the parking for fuel, coolant, oil, or other fluid tread or sidewall.
  • Page 81 STARTING AND OPERATING STARTING AND OPERATING ENGINE BREAK-IN To Resume Speed ....82 Trailer Towing Weights (Maximum Trailer Weight Ratings) ....85 RECOMMENDATIONS —...

  • Page 82: Engine Break-In Recommendations - Gasoline Engine

    ENGINE BREAK-IN CAUTION! RECOMMENDATIONS — GASOLINE Never use Non-Detergent Oil or Straight ENGINE Mineral Oil in the engine or damage may result. A long break-in period is not required for the engine and drivetrain (transmission and axle) NOTE: in your vehicle. A new engine may consume some oil during its first few thousand miles (kilometers) of Drive moderately during the first 300 miles...

  • Page 83: To Activate

    NOTE: To Set A Desired Speed • If the button is continually pushed, the set In order to ensure proper operation, the speed will continue to increase until the Turn the Speed Control on. When the vehicle button is released, then the new set speed Speed Control System has been designed to has reached the desired speed greater than will be established.

  • Page 84: To Accelerate For Passing

    • If the button is continually pushed, the set On steep hills, a greater speed loss or gain Pushing the on/off button or turning the igni- speed will continue to decrease until the may occur so it may be preferable to drive tion switch OFF erases the set speed from button is released, then the new set speed without Speed Control.
  • Page 85 The Rear Back Up Camera can also be acti- The Camera Delay setting can be set to on/off The display of the camera image can be vated when the vehicle is not in REVERSE in the rear camera settings menu. When the enabled or disabled through the rear camera vehicle is shifted out of REVERSE and the setting menu item (Camera on/off).

  • Page 86: Refueling The Vehicle

    3. Fully insert the gasoline nozzle into the CAUTION! CAUTION! filler pipe. • To avoid vehicle damage, the vehicle • Damage to the fuel system or emissions 4. Fill the vehicle with fuel. must be driven slowly when using control system could result from using ParkView to be able to stop in time when NOTE: an improper fuel tank filler tube cap.

  • Page 87: Materials Added To Fuel

    Materials Added To Fuel Indiscriminate use of fuel system cleaning TRAILER TOWING agents should be avoided. Many of these Trailer Towing Weights (Maximum materials intended for gum and varnish re- Designated TOP TIER moval may contain active solvents or similar Trailer Weight Ratings) Detergent Gasoline...

  • Page 88: Recreational Towing - Automatic Transmission

    NOTE: 2. Drive the front wheels onto the tow dolly. CAUTION! When towing your vehicle, always follow ap- 3. Firmly apply the parking brake. Place the • Towing this vehicle in violation of the plicable state and provincial laws. Contact transmission in PARK.
  • Page 89 IN CASE OF EMERGENCY IN CASE OF EMERGENCY BULB REPLACEMENT ... .88 Jacking Instructions ... . .95 GEAR SELECTOR OVERRIDE ..105 Vehicles With Alloy Wheels .

  • Page 90: Bulb Replacement

    BULB REPLACEMENT Replacement Bulbs Interior Bulbs Lamps Bulb Number Front Courtesy Lamps C10W Rear Courtesy Lamps C10W Luggage Lamp Exterior Bulbs Lamps Bulb Number Front Low Beam Headlamp Front High Beam Headlamps Front Side Marker Lamps LED (See your authorized dealer) Front Parking/Daytime Running Lamps W21W Front Turn Signal Lamps...

  • Page 91: Fuses

    FUSES WARNING! WARNING! system blows, contact an authorized serious personal injury, fire and/or prop- WARNING! dealer. erty damage. • Before replacing a fuse, make sure that • When replacing a blown fuse, always use Underhood Fuses the ignition is off and that all the other an appropriate replacement fuse with services are switched off and/or disen- the same amp rating as the original fuse.
  • Page 92 Cavity Maxi Fuse Mini Fuse Description 50 Amp Red – Radiator Fan - High Speed 40 Amp Orange – Blower Motor – 15 Amp Blue Horn – 10 Amp Red Secondary Loads ECM – 15 Amp Blue High Beam – 5 Amp Tan ECM and Transmission Shifter –...

  • Page 93: Interior Fuses

    Interior Fuses The interior fuse panel is part of the Body Control Module (BCM) and is located on the driver's side under the instrument panel. Cavity Mini Fuse Description 5 Amp Beige KL 30 (+30) - IPC 20 Amp Yellow Central Doors Locking 15 Amp Blue KL 30 (+30) - TPMS, EOBD, HVAC, Radio, SGW...

  • Page 94: Central Unit Fuse Panel

    Central Unit Fuse Panel The central power fuse panel is located on the driver’s side under the instrument panel. Cavity Mini Fuse Description 10 Amp Red Front Heated Seat Passenger 10 Amp Red Front Heated Seat Driver 20 Amp Yellow Rear Power Window Driver side 20 Amp Yellow Rear Power Window Passenger side...

  • Page 95: Jack Location

    Jack Location winch mechanism access cover. Remove the access cover and install the winch The jack and tools are stowed under the extension into the winch mechanism. driver’s front seat. Jack Tools 1 — Wrench Handle 2 — Winch Extension Jack Tools 3 —...
  • Page 96 4. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Winch Location Retainer Nut 3. Rotate the wheel wrench handle counter- 6. Lift the spare tire with one hand to give clockwise until the spare tire is on the clearance to tilt the retainer at the end of Spare Tire ground with enough cable slack to allow...

  • Page 97: Preparations For Jacking

    • When winching the tire back into place, the 4. Place the gear selector into PARK. Jacking Instructions winch will make three audible noises once 5. Turn the ignition off to the LOCK position. secure. Reach underneath and shake tire WARNING! 6.
  • Page 98 2. There are two jack engagement locations WARNING! on each side of the vehicle body. • If working on or near a roadway, be NOTE: extremely careful of motor traffic. Place the jack underneath the jack engage- • To assure that spare tires, flat or in- ment location that is closest to the flat tire.
  • Page 99 3. Turn the handle on the jack screw to the WARNING! right until the jack head is properly en- Raise the vehicle only enough to remove gaged in the described location. Do not the tire. raise the vehicle until you are sure the jack is securely engaged.

  • Page 100: Vehicles With Alloy Wheels

    8. Refer to “Torque Specifications” in vehicle by pushing on the stowed tire “Technical Specifications” for proper under the rear bumper at the back of the wheel lug bolt torque. vehicle. If the tire has motion when pushed, use the tools to retighten the 9.

  • Page 101: Vehicles Equipped With Wheel Covers

    5. Rotate the winch mechanism clockwise WARNING! until the wheel is properly stowed under the vehicle and until the wench makes To avoid the risk of forcing the vehicle off three audible noises. the jack, do not fully tighten the wheel bolts until the vehicle has been lowered.

  • Page 102: Tire Service Kit - If Equipped

    TIRE SERVICE KIT — IF EQUIPPED Remove the Tire Service Kit from the vehicle, WARNING! take it out from the bag and place it near the Small punctures up to ¼” (6 mm) in the tire punctured tire. Screw the clear flexible filling •...
  • Page 103 Insert the power plug into the vehicle power WARNING! WARNING! outlet socket. Start the vehicle engine. stow the Tire Service Kit in the place Tire Service Kit is not a permanent flat tire Push the Tire Service Kit power button to the provided.

  • Page 104: Jump Starting

    NOTE: JUMP STARTING CAUTION! Replace the sealant canister prior to the If your vehicle has a discharged battery, it can expiration date at your authorized dealer. Do not use a portable battery booster pack be jump started using a set of jumper cables or any other booster source with a system and a battery in another vehicle or by using a voltage greater than 12 Volts or damage to...

  • Page 105: Jump Starting Procedure

    WARNING! WARNING! • Remove any metal jewelry such as rings, Do not allow vehicles to touch each other watch bands and bracelets that could as this could establish a ground connec- make an inadvertent electrical contact. tion and personal injury could result. You could be seriously injured.

  • Page 106: Ignition Key Removal Override

    2. Connect the opposite end of the positive 6. Once the engine is started, remove the CAUTION! jumper cables in the reverse sequence: (+) jumper cable to the positive (+) post of the booster battery. Accessories plugged into the vehicle Disconnecting The Jumper Cables power outlets draw power from the vehi- 3.

  • Page 107: Gear Selector Override

    4. Pull the steering wheel outward until it is GEAR SELECTOR OVERRIDE 4. Press and maintain firm pressure on the in the end of the travel position, then lock brake pedal. If a malfunction occurs and the gear selector the steering column in position, push the 5.

  • Page 108: If Your Engine Overheats

    6. The vehicle may then be started in • You can also turn the temperature control CAUTION! NEUTRAL. to maximum heat, the mode control to floor continuous chimes, turn the engine off and the blower control to high. This allows 7.
  • Page 109 (U.S. Residents) or www.owners.mopar.ca CAUTION! CAUTION! (Canadian Residents) for further information. Once the vehicle has been freed, push the Racing the engine or spinning the wheels • When “rocking” a stuck vehicle by shift- "ESC Off" switch again to restore "ESC On" may lead to transmission overheating and ing between DRIVE and REVERSE, do failure.

  • Page 110: Towing A Disabled Vehicle

    TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheel OFF The Ground ALL MODELS NOT ALLOWED Flat Tow NONE Front Wheel Lift Or Dolly Tow Rear NOT ALLOWED BEST METHOD Flatbed Refer...
  • Page 111 SERVICING AND MAINTENANCE SERVICING AND MAINTENANCE SCHEDULED SERVICING ..110 Tire Safety Information ..115 Treadwear ....132 Traction Grades .

  • Page 112: Scheduled Servicing

    SCHEDULED SERVICING Your authorized dealer will reset the oil Severe Duty All Models change indicator message after completing Change Engine 4,000 miles Your vehicle is equipped with an automatic the scheduled oil change. If a scheduled oil (6,500 km) or 350 hours of engine run time oil change indicator system.

  • Page 113: Maintenance Plan

    Once A Month Or Before A Long Trip: Maintenance Plan • Check engine oil level. Required Maintenance Intervals • Check windshield washer fluid level. Refer to the maintenance schedules on the • Check tire pressure and look for unusual following page for the required maintenance wear or damage.
  • Page 114 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, boot seals, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive belt, tensioner, idler pulley, and replace if necessary. Additional Maintenance Replace engine air cleaner filter.
  • Page 115 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a com- petent mechanic.

  • Page 116: Engine Compartment

    ENGINE COMPARTMENT Engine Compartment — 2.4L 1 — Air Cleaner Filter 4 — Brake Fluid Reservoir 7 — Washer Fluid Reservoir 2 — Power Steering Fluid Reservoir 5 — Battery 8 — Engine Coolant Pressure Cap 3 — Oil Fill Cap 6 —...

  • Page 117: Raising The Vehicle

    RAISING THE VEHICLE Tire Markings • European — Metric tire sizing is based on European design standards. Tires designed to In the case where it is necessary to raise the this standard have the tire size molded into vehicle, go to an authorized dealer or service the sidewall beginning with the section width.
  • Page 118 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
  • Page 119 EXAMPLE: Service Description: 95 = Load Index • A numerical code associated with the maximum load a tire can carry H = Speed Symbol • A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions •...
  • Page 120 Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
  • Page 121 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a mini- mum of three hours.
  • Page 122 Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in The proper cold tire inflation pressure is the vehicle. listed on the driver’s side B-Pillar or the rear edge of the driver's side door.
  • Page 123 To determine the maximum loading condi- (4) The resulting figure equals the Metric Example For Load Limit tions of your vehicle, locate the statement available amount of cargo and luggage For example, if “XXX” amount equals 635 kg “The combined weight of occupants and load capacity.

  • Page 125: Tires - General Information

    Safety Both under-inflation and over-inflation affect WARNING! the stability of the vehicle and can produce a WARNING! feeling of sluggish response or over respon- Overloading of your tires is dangerous. siveness in the steering. Overloading can cause tire failure, affect •...
  • Page 126 Ride Comfort And Vehicle Stability Inflation pressures specified on the placard Tire pressure may increase from 2 to 6 psi are always “cold tire inflation pressure”. Cold (13 to 40 kPa) during operation. DO NOT Proper tire inflation contributes to a comfort- tire inflation pressure is defined as the tire reduce this normal pressure build up or your able ride.
  • Page 127 • The damage is only on the tread section of It is not recommended driving a vehicle WARNING! loaded at full capacity or to tow a trailer while your tire (sidewall damage is not repair- a tire is in the run flat mode. able).
  • Page 128 Tread Wear Indicators • Driving style. Replacement Tires • Tire pressure - Improper cold tire inflation Tread wear indicators are in the original The tires on your new vehicle provide a bal- pressures can cause uneven wear patterns equipment tires to help you in determining ance of many characteristics.

  • Page 129: Tire Types

    It is recommended you contact your autho- Summer Or Three Season Tires — If WARNING! rized tire dealer or original equipment dealer Equipped tire with a smaller load index could re- with any questions you may have on tire Summer tires provide traction in both wet sult in tire overloading and failure.

  • Page 130: Spare Tires - If Equipped

    Snow Tires While studded tires improve performance on CAUTION! ice, skid and traction capability on wet or dry Some areas of the country require the use of surfaces may be poorer than that of non- Because of the reduced ground clearance, snow tires during the Winter.
  • Page 131 Compact Spare Tire — If Equipped Collapsible spare tire description example: WARNING! 165/80-17 101P. The compact spare is for temporary emer- Compact and collapsible spares are for Since this tire has limited tread life, the gency use only. You can identify if your ve- temporary emergency use only.

  • Page 132: Wheel And Wheel Trim Care

    Limited Use Spare — If Equipped WARNING! WARNING! The limited use spare tire is for temporary vehicle. Failure to do so could result in Compact and Collapsible spares are for emergency use only. This tire is identified by loss of vehicle control. temporary emergency use only.
  • Page 133 Dark Vapor Chrome, Black Satin Chrome, or Low CAUTION! CAUTION! Gloss Clear Coat Wheels wheel's protective finish. Such damage is Avoid products or automatic car washes not covered by the New Vehicle Limited CAUTION! that use acidic solutions or strong alkaline Warranty.

  • Page 134: Department Of Transportation Uniform Tire Quality Grades

    DEPARTMENT OF TRANSPORTATION upon the actual conditions of their Temperature Grades use, however, and may depart signifi- UNIFORM TIRE QUALITY GRADES The Temperature grades are A (the cantly from the norm due to variations highest), B, and C, representing the The following tire grading categories in driving habits, service practices, tire's resistance to the generation of...

  • Page 135: Interiors

    Cleaning Plastic Instrument Cluster Lenses WARNING! WARNING! The lenses in front of the instruments in this The temperature grade for this tire is Do not use volatile solvents for cleaning vehicle are molded in clear plastic. When purposes. Many are potentially flammable, established for a tire that is properly cleaning the lenses, care must be taken to and if used in closed areas they may cause...

  • Page 136: Leather Parts

    Leather Parts NOTE: If equipped with light colored leather, it Mopar Total Clean is specifically recom- tends to show any foreign material, dirt, and mended for leather upholstery. fabric dye transfer more so than darker col- ors. The leather is designed for easy cleaning, Your leather upholstery can be best preserved and FCA recommends Mopar total care by regular cleaning with a damp soft cloth.
  • Page 137 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS WHEEL AND TIRE TORQUE SPECIFICA- FLUID CAPACITIES ... . .137 Chassis ....138 TIONS .

  • Page 138: Wheel And Tire Torque Specifications

    WHEEL AND TIRE TORQUE Inspect the wheel mounting surface prior to After 25 miles (40 km), check the lug nut/ mounting the tire and remove any corrosion bolt torque to be sure that all the lug nuts/ SPECIFICATIONS or loose particles. bolts are properly seated against the wheel.

  • Page 139: Fluid Capacities

    FLUID CAPACITIES U.S. Metric Fuel (Approximate) 2.4L Engine 16 Gallons 60.5 Liters Engine Oil With Filter 2.4 Liter Engine (SAE 0W-20, API Certified) 5.5 Quarts 5.2 Liters Cooling System* 2.4 Liter Engine (Mopar Antifreeze/Engine 7.2 Quarts 6.8 Liters Coolant 10 Year/150,000 Mile Formula) * Includes heater and coolant reservoir filled to MAX level.

  • Page 140: Chassis

    CAUTION! CAUTION! CAUTION! patible with the radiator engine coolant coolant (antifreeze). If a non-OAT engine • Mixing of engine coolant (antifreeze) and may plug the radiator. coolant (antifreeze) is introduced into other than specified Organic Additive • This vehicle has not been designed for the cooling system in an emergency, the Technology (OAT) engine coolant (anti- use with propylene glycol-based engine...

  • Page 141: Mopar Accessories

    MOPAR ACCESSORIES • The following highlights just some of the NOTE: many Authentic Ram Accessories by Mopar All parts are subject to availability. Authentic Accessories By Mopar featuring a fit, finish, and functionality spe- cifically for your Ram. • In choosing Authentic Accessories you gain •...
  • Page 143 MULTIMEDIA MULTIMEDIA CYBERSECURITY ....142 Pairing (Wirelessly Connecting) Your Regulatory And Safety Information Mobile Phone To The Uconnect USA/CANADA ....157 UCONNECT 3/3 NAV WITH 5-INCH System .

  • Page 144: Cybersecurity

    CYBERSECURITY • To help further improve vehicle security WARNING! and minimize the potential risk of a secu- Your vehicle may be a connected vehicle and rity breach, vehicle owners should: • It is not possible to know or to predict all –...

  • Page 145: Uconnect 3/3 Nav With 5-Inch Display

    UCONNECT 3/3 NAV WITH 5-INCH DISPLAY Uconnect 3/3 NAV With 5–inch Display 1 — Settings Button 7 — MEDIA Button 2 — Back Button 8 — RADIO Button 3 — Browse/Enter — Tune/Scroll 9 — On/Off — Volume Knob 4 — MORE Button 10 —...

  • Page 146: Clock Setting

    Clock Setting Equalizer, Balance And Fade Speed Adjusted Volume — If Equipped • Press the “Speed Adjusted Volume” button 1. To start the clock setting procedure, push 1. Push the SETTINGS button on the on the touchscreen to select between OFF, the SETTINGS button on the right right side of the display.
  • Page 147 Loudness — If Equipped • Press the “Loudness” button on the touch- screen to select the Loudness feature. When this feature is activated, it improves sound quality at lower volumes. Auto-On Radio • Press the “Auto-On Radio” button on the touchscreen, select On, Off, or Recall Last followed by pressing “Done”...

  • Page 148: Radio Operation

    Radio Operation Uconnect 3/3 NAV With 5–inch Display Radio 1 — Radio Station Presets 5 — Station Info 2 — Show All Presets 6 — Direct Tune 3 — Seek Up 7 — Radio Band 4 — Audio Settings 8 — Seek Down...

  • Page 149: Usb/Audio Jack (Aux)/Bluetooth Operation

    Seek Up/Down Buttons USB/Audio Jack (AUX)/Bluetooth • USB/iPod Mode is entered by either insert- ing a USB Jump Drive or an iPod cable into Operation • Push the up or down button to seek through the USB port or by pushing the MEDIA radio stations in AM, FM or SXM bands.

  • Page 150: Navigation

    • Push the MEDIA button on the faceplate; Uconnect 3/3 NAV Available Media Hubs UCONNECT SETTINGS press the “Source” button on the touch- Media Hub (USB, The Uconnect system allows you to access screen then select AUX to change the mode AUX Ports) Uconnect 3/3 NAV to the AUX device.

  • Page 151: Steering Wheel Audio Controls

    Depending on the vehicles options, the following feature settings are available: • Language • Doors & Locks • Display • Engine Options • Units (If Equipped) • Audio • Voice • Phone (If Equipped) • Clock • SiriusXM Setup (If Equipped) •...

  • Page 152: Uconnect Phone

    UCONNECT PHONE Uconnect Phone (Bluetooth Hands Free Calling) Uconnect 3/3 NAV With 5–inch Display Phone Menu 1 — Call/Redial/Hold 5 — Mute Microphone 9 — Direct Dial Pad 2 — Mobile Phone Signal Strength 6 — Transfer To/From Uconnect System 10 —...

  • Page 153: Pairing (Wirelessly Connecting) Your Mobile Phone To The Uconnect System

    The Uconnect Phone feature enables you to • Most mobile phones/devices are compat- • Mobile phone pairing is not available while the vehicle is in motion. place and receive hands-free mobile phone ible with the Uconnect system, however some mobile phones/devices may not be calls.
  • Page 154 4. Select “Paired Phones.” To search for available devices on your When prompted on the mobile phone, accept the connection request from Uconnect Bluetooth enabled iPhone: 5. Select “Add device.” Phone. 1. Press the Settings button. NOTE: NOTE: 2. Select Bluetooth. Uconnect Phone will display an “In prog- Some mobile phones will require you to enter ress”...
  • Page 155 Pair Your Android Device: 5. Once your mobile phone finds the Confirm the passkey shown on the mobile Uconnect system, select “Uconnect.” phone matches the passkey shown on the Uconnect system then accept the Bluetooth • You may be prompted by your mobile pairing request.

  • Page 156: Common Phone Commands (Examples)

    You are now ready to make hands-free calls. Transfer Ongoing Call Between Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are Press the Uconnect VR button on your Handset And Vehicle shown at the top of the main phone screen. steering wheel to begin.

  • Page 157: Changing The Volume

    Changing The Volume Using Do Not Disturb While in Do Not Disturb, Conference Call can be selected so you can still place a second • Start a dialogue by pushing the VR button With Do Not Disturb, you can disable notifi- call without being interrupted by incoming , then say a command.

  • Page 158: Incoming Text Messages

    Incoming Text Messages 4. Turn “Show Notifications” to on. 4. Turn “Show Notifications” to on. • A pop up will appear asking you to After pairing your Uconnect system with a accept a request for permission to con- Bluetooth enabled mobile device with the nect to your messages.

  • Page 159: Helpful Tips And Common Questions To Improve Bluetooth Performance With Your Uconnect System

    Helpful Tips And Common Mobile Phone won’t pair to system: Making calls while connected to AUX: Questions To Improve Bluetooth • Perform a hard reset in the mobile phone by • Plugging in your mobile phone to AUX while removing the battery (if removable — see Performance With Your Uconnect connected to Bluetooth will disable Hands- your mobile phone’s owner manual).

  • Page 160: Uconnect Voice Recognition Quick Tips

    ments, such as aboard airplanes. If you are NOTE: UCONNECT VOICE RECOGNITION unsure of restrictions, you are encouraged to • This equipment has been tested and found QUICK TIPS ask for authorization before turning on the to comply with the limits for a Class B wireless radio.

  • Page 161: Get Started

    Get Started Push the VR button . After the beep, say: 1. Visit UconnectPhone.com to check mobile • Cancel to stop a current voice session device and feature compatibility and to find phone pairing instructions. • Help to hear a list of suggested Voice Com- mands 2.

  • Page 162: Radio

    Radio • Play artist Beethoven; Play album Greatest Hits; Play song Moonlight Sonata; Play Use your voice to quickly get to the AM, FM or genre Classical SiriusXM Satellite Radio stations you would TIP: Press the Browse button on the touch- like to hear.

  • Page 163: Voice Text Reply

    Visit UconnectPhone.com to check mobile TIP: Your mobile phone must have the full device and feature compatibility and to find implementation of the Message Access Pro- phone pairing instructions. file (MAP) to take advantage of this feature. details about MAP, visit Push the Phone VR button or Phone...

  • Page 164: General Information

    General Information NOTE: Uconnect System Support: Changes or modifications not expressly ap- • U.S. residents visit DriveUconnect.com or The following regulatory statement applies to proved by the party responsible for compli- call: 1-877-855-8400 (24 hours a day all Radio Frequency (RF) devices equipped in ance could void the user’s authority to oper- 7 days a week) this vehicle:...
  • Page 165 CUSTOMER ASSISTANCE CUSTOMER ASSISTANCE IF YOU NEED ASSISTANCE ..164 Customer Assistance For The Hearing In The 50 United States And Or Speech Impaired (TDD/TTY) ..165 Washington, D.C....166 FCA US LLC Customer Center.

  • Page 166: If You Need Assistance

    IF YOU NEED ASSISTANCE Any communication to the manufacturer's In Mexico Contact customer center should include the following Av. Prolongacion Paseo de la Reforma, 1240 The manufacturer and its authorized dealer are information: vitally interested in your satisfaction. We want Sante Fe C.P.

  • Page 167: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)

    Customer Assistance For The The manufacturer stands behind only the investment in facilities, tools, and training to assure that you are absolutely delighted with manufacturer's service contracts. If you pur- Hearing Or Speech Impaired the ownership experience. You will be chased a manufacturer's service contract, (TDD/TTY) pleased with their sincere efforts to resolve...

  • Page 168: Reporting Safety Defects

    • The Owner's Manual and User Guide elec- www.tc.gc.ca/roadsafety/ tronic files are also available on the dividual problems between you, your Chrysler, Jeep, Ram Truck, Dodge and SRT authorized dealer or FCA US LLC. PUBLICATION ORDER FORMS websites. To contact NHTSA, you may call the Ve- •...
  • Page 169 INDEX Accessories ....139 Axle Lubrication ....138 Child Restraints Mopar ....139 Booster Seats .
  • Page 170 Customer Assistance ... .164 Oil .....137 Specifications ....137 Tank Capacity .
  • Page 171 iPod/USB/MP3 Control Seat Belt Reminder ...34 New Vehicle Break-In Period ..80 Bluetooth Streaming Audio ..150 Service ....88 Tire Pressure Monitoring Occupant Restraints .
  • Page 172 Radio ....143, 160 Seat Belt Seatback Release ... .11 Presets ....146 Adjustable Upper Shoulder Belt Tilting .
  • Page 173 Supplemental Restraint System - Air Bag . .54 Sizes ....116 Receiving A Call ... .150 Snow Tires .
  • Page 179 This guide has been prepared to help you get quickly acquainted with your new RAM brand vehicle and to provide a convenient reference source for common questions. However, it is not a substitute for your Owner’s Manual. For complete operational instructions, maintenance procedures and important safety messages, please consult your Owner’s Manual, Navigation/Uconnect manuals found on the website on the back cover and other Warning Labels in your vehicle.
  • Page 180 WHETHER IT’S PROVIDING INFORMATION DOWNLOAD A FREE ELECTRONIC COPY OF ABOUT SPECIFIC PRODUCT FEATURES, THE MOST UP-TO-DATE OWNER’S MANUAL, MEDIA TAKING A TOUR THROUGH YOUR VEHICLE’S HERITAGE, KNOWING WHAT STEPS TO AND WARRANTY BOOKLET BY VISITING: TAKE FOLLOWING AN ACCIDENT, OR SCHEDULING YOUR NEXT APPOINTMENT, WE KNOW YOU’LL FIND THE APP AN WWW.MOPAR.COM/EN-US/CARE/OWNERS-MANUAL.HTML (U.S.

Table of Contents