Table of Contents
Advertisement
RAID FF Cards
Two RAID FF 1 cards are installed in the back of a ProFibre Storage Array
Controller Unit (see Figure 6
Figure 6. RAID FF Card Assemblies
A RAID FF card has the following lights:
Figure 7. RAID FF Card Assembly Lights
Power light 1
The Power light, which is green, is lit when dc power is applied to the
RAID FF card.
DRIVE FC Active light 2
The DRIVE FC Active light, which is green, is lit when there is any activity
on the Fibre Channel connection to any disk drive.
HOST FC Active light 3
The HOST FC Active light, which is green, is lit when there is any activity
on the Fibre Channel connection to the host computer.
7
Chapter 1. Introduction
Advertisement
Table of Contents
