Page 1
This Quick Reference Guide is for reference and refresh only and is not intended as a substitute for the user guide that came with your SonoSite iViz system. For as a substitute for the user guide that came with your SonoSite iViz system. For...
1 On the back of the system, position the battery in the battery slot so that the Swipe beveled edge of the battery is nearest the side of the SonoSite iViz system. Move your finger quickly across the screen. Drag Move one or two fingers across the screen, usually to move an object from one location to another.
Page 3
Tap the label you want to add, such as Right or Medial. In SonoSite iViz, the active imaging mode is always highlighted in blue so you can tell what imaging mode you are using. For example, in Color mode, both b Using your finger, drag the label to a location on the screen.
Page 4
Measuring Sharing a study Measuring distance 1 From the Patient module, tap the iViz Studies tab. 1 On a frozen scan, tap Measurements. 2 Tap Study. This exports the reports, images and clips within a study. 2 Under the General measurements area, tap Distance.
3 Switch to the Cardiac calculation list. F: 1-425-951-1201 iViz, SonoSite, and the SonoSite logo are trademarks or registered trademarks of FUJIFILM SonoSite, 4 Under HR, tap HR in the calculations list. Inc. in various jurisdictions. FUJIFILM is a trademark and registered trademark of FUJIFILM 5 Position the caliper at the peak of a heartbeat, and lift your finger from the Corporation in various jurisdictions.
Need help?
Do you have a question about the iViz and is the answer not in the manual?
Questions and answers