Function Lock; Automatic Switch-Off; Set + Go; Brightness Of The Display - AEG BPK742320M User Manual

2. Touch and
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.

11.3 Function Lock

This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
If the Pyrolysis function
operates, the door is locked
and the symbol of a key
comes on in the display.
To deactivate the function, press
display shows a message. Press
and then to confirm.
When you deactivate the
appliance, the function also
deactivates.

11.4 Set + Go

The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Activate the appliance.
2. Set a heating function.
3. Press
again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
at the same time
. The
again
) to start
• Function Lock is on when
the heating function
operates.
• The menu: Basic Settings
lets you activate and
deactivate the function:
Set + Go.

11.5 Automatic Switch-off

For safety reasons the appliance turns off
automatically after some time if a heating
function operates and you do not
change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic switch-off
does not work with the
functions: Light, Food
Sensor, Duration, End Time.

11.6 Brightness of the display

There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.
11.7 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
ENGLISH 21
Switch-off time (h)
12.5
8.5
5.5
1.5