Jumpers - Fujitsu SK-AMAPOLLO-BASE-V11 User Manual

3.1 Jumpers

Jumper Description
JP6 Set the power source
JP1 Remove for VBAT usage
JP10 Arduino A1 Selection
JP10 Arduino A5 Selection
JP12 Solder Jumper, SWDCLK
JP13 Debugger Program Mode
JP14 Solder Jumper, SWO
JP15 Solder Jumper, Reset
Select power delivery
JP16 Arduino headers
JP17 RGB LED (Red)
JP18 RGB LED (Red)
JP19 RGB LED (Red)
JP2 Solder Jumper, SWDIO
JP3 Select current probe
JP4 Debugger I2C and SPI mode open
JP5 Debugger SPI mode
Debugger Apollo 1 / 2 UART
JP7 mode
JP8 Arduino A2 Selection
JP9 Arduino A0 Selection
Debugger Apollo 1 / 2 UART
P1 mode
EEU-UG-2017120001-10
FEEU Ultra-Low-Power Apollo Evaluation Kit Platform
Chapter 3 Connectors
Default
2-3
closed
Apollo1: 1-2
Apollo2: 2-3
Apollo1: 1-2
Apollo2: 2-3
closed
open
closed
closed
1-2
closed
closed
closed
closed
1-2,3-4
open
Apollo1: 1-2
Apollo2: 2-3
Apollo1: 1-2
Apollo2: 2-3
Apollo1: 1-2
Apollo2: 2-3
Apollo: 2-4 UART
Apollo 2: 3-4 UART
- 28 -
Options
1-2: Power via DC-in
2-3: Power via Debug-USB-Port
Open for VBAT usage
1-2 GPI013/ADC1 (Apollo)
2-3 GPI037/ADC6 (Apollo 2)
1-2 GPI030/ADC5 (Apollo)
2-3 GPI033/ADC5 (Apollo 2)
closed: start in USB programming mode
1-2: Direct via 3.3V
2-3: Include to power measurement
1-2,3-4: Current probe via shunt
2-3: No current Measurement, no shunt
closed in I2C and SPI mode
closed in SPI mode
Apollo: 1-2 I2C, UART
Apollo 2: 1-2 I2C, SPI-Master
Apollo: 2-3 SPI-Slave
Apollo 2: 2-3 SPI-Slave, UART
1-2 GPI014/ADC2 (Apollo)
2-3 GPI011/ADC2 (Apollo 2)
1-2 GPI012/ADC0 (Apollo)
2-3 GPI016/ADC0 (Apollo 2)
Apollo: 3-4 SPI, 2-4 UART
Apollo 2: 3-4 SPI-Slave, 3-4 UART, 4-6 SPI-Master
© Fujitsu Electronics Europe GmbH