Jumpers And Switches; Operating Mode (S2) - Fujitsu F2MC-16FX User Manual

3 Jumpers and Switches

This chapter describes all jumpers and switches that can be modified on the evaluation
board. The default setting (MB96320 Series) is shown with a grey shaded area.

3.1 Operating Mode (S2)

The DIP-switch S2 is used to set the operating mode of the KC. Ensure that the mode pin
settings correspond to the operation-mode of the application. For more detailed information
please check the Hardware-Manual of the microcontroller.
DIP switch
S2/1 (MD0)
S2/2 (MD1)
S2/3 (MD2)
S2/4
Dip-Switch S2
(run mode)
FMEMCU-UG-960010-12
SK-96320-80PMC User Guide
Chapter 3 Jumpers and Switches
Setting
ON (closed)
OFF (open)
ON (closed)
OFF (open)
ON (closed)
OFF (open)
not connected
MD0 MD1 MD2 nc
1 2 3
- 12 -
Logical value
1 (high)
0 (low)
1 (high)
0 (low)
1 (high)
0 (low)
ON
OFF
4
© Fujitsu Microelectronics Europe GmbH