Connecting Sources - Primare I35 User Manual

C O N N E C T I NG SOURCES
Digital coax source
Digital optical source
Balanced analogue
source
Unbalanced analogue
source
to play music from a source
Connect the source via a suitable cable:
l
Balanced analogue XLR cable
Unbalanced analogue Phono RCA cable
Digital optical source Digital optical cable
Digital source Digital coax cable
Select the source from the front panel, or using the
l
remote control.
I35 DAC Integrated Amplifier User Guide
Digital coax cable
Digital optical cable
XLR cable
Phono RCA cable
to use the I35 as a pC/mac sound output device
Connect the Mac or PC to the I35 via a USB-A to
l
USB-B cable.
pC
Windows 7, , .1, or 10 (3/6-bit) is required. You
need to install the Primare xmos audio driver, available on
primare.net.
macintosh
OSX 10. or later is recommended. No driver is required.
Connect the computer's USB port to the USB B input on
l
the I35 using a USB A to USB B cable.
The I35 will then appear as a sound output device called
primare USB Audio DAC in the Sound control panel (PC)
or Sound system preferences panel (Macintosh).
Select the PC/MAC source on the I35.
l
PC/Mac
USB-A to USB-B cable
Loudspeakers
I35
Select the primare USB Audio DAC as the sound output
l
device in the Mac Sound system preferences panel or
the PC Sound control panel.
11