Alinco DJ-NX40T Instruction Manual page 3

■ Dealer programming
The utility software may be available to distributors/dealers only. An
optional programming cable is required for programming. The
manufacturer will not release the software to unauthorized party so
please contact your dealer for details.This product is delivered to
consumers after being preprogrammed with the operating parameters,
then certain operation may be disabled for user-accesses. For this
reason some features mentioned in this booklet may not be available,
or features NOT mentioned in this manual may be available to your
radio. The manufacturer and distributers are not aware of details of
such dealer-programming.Therefore, please contact to your dealer in
case any technical assistance may be necessary.
Copyright © All rights reserved.
No part of this document may be reproduced, translated or
transcribed in any from or by any means without the prior permission
of Alinco. Inc., Osaka, Japan. Alinco and ALINCO logo are registered
trademarks of Alinco incorporated, Japan in United States, EU
States, Russia, China and many other countries.
NXDN and NXDN logo are registered trademarks of Icom Incorporated
and JVCKENWOOD Corporation.
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
All other trademarks are the properties of their respective holders.
ALINCO and authorized dealers are not responsible for any
typographical errors there may be in this manual. The contents of this
manual may be updated without any notice or obligation.Alinco
cannot be liable for pictorial or typographical inaccuracies. Changes
or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NXDN
TM
NXDN is a protocol name for a new digital communications system using
TM
4-level FSK technology.
Please visit here for details at http://www.nxdn-forum.com/
Notice
3