Alinco DJ-NX40T Instruction Manual page 20

Basic Operation
3.4 Monitor Function
When the MONI key is pressed, the squelch unmutes regardless of the
Radio Access Number(RAN)/Subtone setting/Optional Signaling.
NOTE NOTE:
Only a noise-alike signal is heard when the receiving signal is
encrypted (scrambled).
3.5 Receiving
When a signal is received on the channel that you selected, S-meter is
displayed on the LCD, then the received signal can be heard.
The green RX indicator also lights at this time.
3.6 Transmitting
1. Press the PTT key. The red TX indicator turns on while transmitting.
2. While holding down the PTT key, speak into the unit at normal voice
from the distance of 5cm (2").
3. Release the PTT key to receive.
NOTE:
NOTE
• Speaking too loud, too close or too far from the unit may distort
the audio.
• Because the transceiver is manufactured to be water resistant, a
special cloth material covers the built-in microphone. For this
reason, the transmitting audio may be slightly different using the
built-in microphone in comparison to using an optional external
microphone.
• Do not close the microphone hole on the front panel with your
finger. Be cautious specially when wearing gloves.
20