Alinco DJ-NX40T Instruction Manual page 15

1.2.5 Using the Charger
1. Connect the AC adapter plug to the DC-IN jack on the back of the
charger.
*The design of the AC adapter may vary depending on the models.
2. Connect the adapter to an outlet.
AC adapter
(EDC-283)
EDC-196R
3. Turn off the unit. The battery pack can't be charged correctly when the
unit is turned on. Insert the unit to the charger as shown above.
The red indicator on the desktop charger turns on while charging.
When charging is completed, the green indicator turns on.
It takes up to 4.5 hours to fully charge the battery.
NOTE: NOTE
You can't operate the unit with using a provided charger.
The charger is to charge the battery pack only.
*The additional charger
can be connected up to
6 in the same way.
Optional AC adapter (EDC-175)
Accessories
EDC-196R
15