Priority Scan - Kenwood TK-190 Instruction Manual

Priority Scan

■
A priority channel must be programmed in order
for Priority Scan to operate. A "P" appears on the
display when the priority channel is selected.
During Scan, the transceiver automatically reverts
to the priority channel when a signal is received on
it, even if a signal is being received on your current
channel.
Note:
◆ Your dealer programs the amount of time it takes for the
transceiver to check for a signal on the priority channel.
◆ If programmed by your dealer, you can temporarily add or
delete the priority channel from the scan sequence.
◆ Your dealer can program Scan to cancel the priority channel
QT/DQT tone (if a tone is set up on the channel) during Scan
so that all calls on the priority channel will be heard.
8