Operating Basics; Switching Power On/Off; Adjusting The Volume; Selecting A Channel - Kenwood TK-190 Instruction Manual

Switching Power ON/OFF

■
Turn the Power switch/ Volume control clockwise to
switch the transceiver ON.
Turn the Power switch/ Volume control counter-
clockwise to switch the transceiver OFF.

Adjusting the Volume

■
Rotate the Power switch/ Volume control to adjust
the volume. Clockwise increases the volume and
counterclockwise decreases it. Your dealer may have
set a minimum volume level for your transceiver.

Selecting a Channel

■
Rotate the Channel selector or press the keys
programmed with Channel Up and Channel Down
to select a channel. There are 6 channels on this
transceiver. Your dealer can program each channel
with the following features:
• Transmit/ Receive Frequencies
• QT/DQT Tone (for transmitting/ receiving) {page }
• Channel name (up to 7 digits) {page }
• Option signalling (-Tone/ DTMF) {pages 0 and }
• PTT ID (beginning/ end of transmission) {page }
• BCL (Busy Channel Lockout) {page }
• High/ low transmit power (default is high) {page }
• Add to or remove from scan (default is add) {page 7}
• Voice Scrambler (only with optional board) {page 6}
Additionally, your dealer can program a Priority
channel, Home channel, and Emergency channel.

OPERATING BASICS