Main Power Switch; Power Supply Inlet; Module Connector 1; Module Connector 2 - Duplo DBM-120 Maintenance Manual

1-43. Main Power Switch

Incorporated in the remote unit. Used to turn ON/OFF the power supply of the machine.

1-44. Power Supply Inlet

Incorporated in the remote unit. Connected to the power cord.

1-45. Module Connector 1

Connector for communication with the machine connected. When performing communication from the upstream
processing unit, insert an interface cable.

1-46. Module Connector 2

Connector for communication with the machine connected. When performing communication to the downstream
processing unit, insert an interface cable.

1-47. LED 1 (Green)

Lights up in green when power is supplied to the machine.

1-48. LED 2 (Orange)

Lights up only when the remote function is effective and the power is supplied from the upstream processing unit.

1-49. IF Cable

Interface cable for communication with the downstream processing unit.

1-50. Power Cord

Supplies primary power to the machine.
2-9
11C-M12M0-0004-0