Conveyance Mechanism (Exit) - Duplo DBM-120 Maintenance Manual

1-8. Conveyance Mechanism (Exit)

Paper is conveyed by the flat belt.
Adjustments
(1) Adjusting the standby position of the roller
Adjust the angle of the angle so that the mylar and
roller become even.
(2) Adjusting the position of the solenoid
With the roller touching the flat belt, adjust the
solenoid to the position where a 0.5 mm clearance
is formed with the plunger.
Precautions on replacing the flat belt
Replace taking note of the rotating direction of the flat belt. (Arrow at the back of the flat belt)
Replace the flat belt in pairs.
1-10
98H-4347X
Roller
11C-6074X
Mylar
98H-4347X
Roller
11C-M12M0-0004-0
952-1438X
Angle
11C-4505X
Flat belt