Adding Ip Addresses For Remote Access - NetComm Wireless NF18ACV Setup Manual
Enhanced vdsl2/adsl2+ dual band ac1600 wireless gigabit gateway remote administration setup guide
Hide thumbs
Also See for NF18ACV:
- User manual (93 pages) ,
- Troubleshooting manual (16 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
5
The Add IP Addresses page opens, in the IP Address/Mask text box enter the IP address (block) of the location that
you want to allow access to your NF18ACV from.
This should be a public IP address which you should know beforehand.
This might be an IP address provided by your ISP support team, NetComm support team or a friend who is willing to
help you configure something remotely.
6
Once configured the IP Address will be entered into the list:
Now click on the Enable radio button to enable the access control. Once clicked the settings will be applied
7
automatically, you do not need to press any other button to enable it.
Now only that IP address (block) can access your NF18ACV's web interface.
However, you always can configure through web interface from local LAN.
4 of 4
© NetComm Wireless 2017
Remote Administration Setup Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the NF18ACV and is the answer not in the manual?