NetComm Wireless NF18ACV Setup Manual page 2

4 The Access Control -- Services page will open:
Tick the  enable checkbox of the WAN option for the HTTP Service.
5
6 This is highly recommended to change the Port to something other than 80. This is just a safety measure and part of
best practices.
7 Click the Apply/Save button.
You should now be able to access your NF18ACV via the address:
http://<your external IP address>:<port number>
You can find your external (public) IP address by going to www.ipmonkey.com or by clicking on WAN option under Device
Info.
2 of 4
© NetComm Wireless 2017
Remote Administration Setup Guide