Playing Back Sound On A Bluetooth Device - Sony STR-DH590 Operating Instructions Manual

Playing Back Sound on a
BLUETOOTH Device
You can receive audio content from a
WALKMAN®, smartphone or tablet that has
a BLUETOOTH function and listen to it via
this receiver.
About the BLUETOOTH indicator
The BLUETOOTH indicator above the
BLUETOOTH button on the receiver lights
up or flashes in blue to show the
BLUETOOTH status.
Receiver status
The receiver is
searching for a
BLUETOOTH device to
connect
BLUETOOTH pairing
BLUETOOTH
connection is
established
BLUETOOTH
BLUETOOTH
PAIRING
 +/–
/,
/,
, 
Indicator status
Flashes slowly
Flashes quickly
Lights up
Registering BLUETOOTH
devices to the receiver (Pairing
operation)
Pairing is an operation in which
BLUETOOTH devices are registered to each
other before connection. Follow the steps
below to pair the BLUETOOTH device and
the receiver. Once the BLUETOOTH devices
are paired, there is no need to pair them
again. When the pairing is complete,
proceed to "Listening to sound on a paired
BLUETOOTH device" (page 32).
1
Place the BLUETOOTH device
within 1 meter (3.3 feet) of
the receiver.
2
Press BLUETOOTH PAIRING.
"PAIRING" flashes on the display
panel. Perform step 3 within five
minutes, otherwise pairing will be
canceled. If pairing is canceled, repeat
this step.
3
Perform pairing on the
BLUETOOTH device to detect
the receiver.
For details, refer to the operating
instructions of your BLUETOOTH
device.
A list of detected devices may appear
on the BLUETOOTH device display
depending on the type of BLUETOOTH
device. The receiver is displayed as
"STR-DH590".
4
Select "STR-DH590" on the
BLUETOOTH device display.
If "STR-DH590" is not displayed,
repeat this process from step 1.
When the BLUETOOTH connection is
established, the paired device name
appears on the display panel.
5
Start playback on the
BLUETOOTH device.
31 GB