Sony STR-DH590 Operating Instructions Manual page 32

6
Adjust the volume.
Adjust the volume of the BLUETOOTH
device first. If the volume level is still
too low, press  +/– to adjust the
volume level of the receiver.
To cancel pairing operation
Pairing operation will be canceled when
you switch the input.
Note
• Some applications of BLUETOOTH device cannot
be controlled from the receiver.
• If a passkey is required on the display of the
BLUETOOTH device in step 4, enter "0000". The
passkey may be called "Passcode", "PIN code",
"PIN number" or "Password".
• You can pair up to ten BLUETOOTH devices. If an
11th BLUETOOTH device is paired, the least
recently connected device will be replaced by
the new one.
Tip
• You can operate a BLUETOOTH device using
/ (fast rewind/fast forward),
/ (previous/next),  (play/pause),
 (stop). For details on operation, visit the Help
Guide.
• If you press  in [BT] input when no
BLUETOOTH device is connected, the receiver
automatically connects to the last connected
BLUETOOTH device.
Listening to sound on a paired
BLUETOOTH device
1
Turn on the BLUETOOTH
function on the BLUETOOTH
device.
2
Press BLUETOOTH.
The receiver connects to the last
connected BLUETOOTH device and the
device name appears on the display
panel.
3
Start playback on the
BLUETOOTH device.
GB
32
4
Adjust the volume.
Adjust the volume of the BLUETOOTH
device first. If the volume level is still
too low, press  +/– to adjust the
volume level of the receiver.
To disconnect a BLUETOOTH
connection
The BLUETOOTH connection will be
disconnected when you perform either of
the following operations:
• Switch the input.
• Turn off the BLUETOOTH function on the
BLUETOOTH device.
• Press BLUETOOTH PAIRING.
• Turn off the receiver or the BLUETOOTH
device.
• Press BLUETOOTH on the receiver again.
Note
• The functions may differ depending on the
specifications of the BLUETOOTH device.
• The audio playback on this receiver may be
delayed from that on the BLUETOOTH device
because of the characteristics of the
BLUETOOTH wireless technology.
Tip
• You can enable or disable AAC codec reception
from BLUETOOTH device. For details on "BT
AAC" setting, visit the Help Guide.
• You can connect to the receiver from a paired
BLUETOOTH device when "BT POWER" is set to
"BT ON" in the "<BT>" menu. For details, visit the
Help Guide.