Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Inspiron 15 7000 Service Manual

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw hole on the power-adapter port with the screw hole on the palm
rest and keyboard assembly and snap it into place.
2 Replace the (M2x3) screw that secures the power-adapter port to the palm rest
and keyboard assembly.
3 Route the power-adapter port cable through the routing guides on the palm rest
and keyboard assembly.

Post-requisites

1 Replace the display
2 Replace the system
3 Follow the procedure from step 4 to step 5 in
4 Replace the solid-state
5 Replace the heat
6 Replace the fan.
7 Replace the wireless
8 Replace the memory
9 Replace the battery.
10 Replace the base
computer. After working inside your computer, follow
After working inside your
assembly.
board.
drive.
sink.
card.
module.
cover.
computer. For more safety best
www.dell.com/
"Replacing the hard
Before
drive".
71