Removing the status-light board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Open the latch and disconnect the status-light board cable from the status-light
board.
2
Remove the screw (M2x3) that secures the status-light board to the palm rest
and keyboard assembly.
52
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before